We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium housed wirewound braking resistor 1000W 75ohm rectangular finned body with cables

Unique-Bargains

Unique-Bargains Aluminium Housed Wirewound Braking Resistor 1000W 75ohm electronic

SKU CH-01WW-JQPQC

Aluminium-housed wirewound braking resistor rated at 1000 W and 75 ohm for power supply, transducer and elevator applications

  • Featurespower supply;transducer;elevator;heat;good performance
  • High power handling with 1000W rating
  • Effective heat dissipation via aluminium housing
  • Secure mounting using 0.9 x 0.6cm holes
  • Reliable connections from nylon-wrapped leads with solder lugs

1000 W 75 Ω Braking Resistor

The Unique-Bargains aluminium housed wirewound braking resistor dissipates 1000 W at 75 Ω. It is built for power supplies, transducers, elevators and similar industrial equipment that need reliable dynamic braking. The aluminium housing provides effective heat dissipation during continuous operation.

Mounting Holes 0.9 × 0.6 cm

Two mounting holes measuring 0.9 by 0.6 cm accept standard bolts for secure panel installation. The 33.5 cm leads with solder lug terminals simplify wiring, but verify the hole spacing matches your bracket before drilling. The 33 × 6 × 3 cm body requires adequate clearance for airflow.

Highlights

  • High power handling with 1000W rating
  • Effective heat dissipation via aluminium housing
  • Secure mounting using 0.9 x 0.6cm holes
  • Reliable connections from nylon-wrapped leads with solder lugs

Specifications

BrandUnique Bargains
Featurespower supply;transducer;elevator;heat;good performance

Questions about this item

How can I verify the 1000W 75ohm resistor is operating correctly after installation?

Measure resistance across the solder lug terminals with a multimeter; it should read close to 75ohm. During use the aluminium housing will become warm, confirming the wirewound element is dissipating power as intended.

What comes in the box and what must I source separately?

The package contains the aluminium-housed wirewound resistor with nylon-wrapped leads and solder lug terminals. Mounting hardware for the 0.9 x 0.6cm installing holes and any wiring or connectors to the power supply or transducer are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.