Unique-Bargains
Unique-Bargains AC 125V 15A US 3 Pin Panel Mount Power Socket 2pcs
Two panel-mount US three-pin sockets rated for 125V AC and 15A, supplied as a pair weighing 20g
- Rated for 125V AC and 15A current handling
- Panel-mount design enables secure installation in equipment
- US three-pin outlet fits standard North American plugs
- Supplied as a pair for dual-outlet needs
- Compact 25 mm square footprint suits tight enclosures
AC 125V 15A Panel Mount Socket
This pack contains two US three-pin panel-mount power sockets rated for AC 125V at 15A. Each unit weighs approximately 20g and measures 25 x 25 x 3 mm. They are designed for builders integrating mains power into UPS units, vehicle power supplies, cabinets or lighting equipment. The snap-in mounting style suits thin metal or plastic panels in custom enclosures.
Two-Piece Convenience for Prototyping
Supplying two identical sockets lets you wire matching input and output points on the same chassis without sourcing separate parts. The uniform 3-pin terminal layout simplifies loom preparation because every connection follows the same pinout. Having a spare unit on hand also speeds up bench testing when a socket must be swapped during development.
Fixed 15A 125V AC Rating
The contacts are rated strictly for 15A at 125V AC, so they cannot be used on higher-voltage mains or circuits that exceed this current. The three-pin US configuration provides line, neutral and ground only; there is no provision for DC loads, three-phase supplies or auxiliary signal pins. Panel thickness and cut-out dimensions must match the 25 mm square footprint, otherwise the snap-in clips will not retain the socket securely.
Highlights
- Rated for 125V AC and 15A current handling
- Panel-mount design enables secure installation in equipment
- US three-pin outlet fits standard North American plugs
- Supplied as a pair for dual-outlet needs
- Compact 25 mm square footprint suits tight enclosures
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Will the snap-in panel clips on these 25 mm sockets need replacement after repeated insertions?
The sockets use a snap-in panel mount design rated for 15 A at 125 V AC; the clips are integral to the housing and are not sold as separate replaceable parts.
What is the first limit reached when the socket runs at 15 A continuously?
The 15 A current rating is the primary limit; sustained operation at that level will hit the thermal and contact-resistance ceiling defined by the 125 V AC specification.
How much heat does each 20 g socket generate when powering a 125 V 15 A load all day?
At the full 15 A rating the contacts and terminals will warm noticeably; the 20 g mass and 25 mm body provide limited dissipation, so expect the panel area to become warm to the touch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
