We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five silver stainless steel rods 2mm thick 250mm long

Unique-Bargains

Unique-Bargains 5 Pcs 2mm Dia 250mm Stainless Steel Round Rod Bar accessory

SKU CH-QD2Z-REFZ8

Five stainless-steel rods, each 2 mm by 250 mm, for DIY RC airplane shafts and axles

  • TypeOther Accessories
  • Stainless steel resists corrosion for lasting use
  • 2 mm diameter fits precision model builds
  • 250 mm length suits a range of DIY projects
  • Five rods per pack give plenty of spares
  • Light 37 g total weight keeps models agile

Stainless Steel Rods for RC DIY

This pack supplies five stainless steel round rods measuring 2mm in diameter and 250mm in length. They serve as raw material for hobbyists building or repairing RC airplanes, cars and ships. The silver-tone bars weigh 37g in total and arrive new.

Replaces worn or bent shafts

Use these rods to swap out damaged gear shafts, motor shafts or miniature axles on existing models. The upgrade is worth it when the original part has deformed enough to cause vibration or binding that affects handling.

Limited to manual machining

The 2mm diameter suits light-duty applications such as short support shafts and shaft pockets. Builders needing larger diameters, different alloys or pre-drilled holes must source alternative stock because these bars are supplied as plain round rod only.

Highlights

  • Stainless steel resists corrosion for lasting use
  • 2 mm diameter fits precision model builds
  • 250 mm length suits a range of DIY projects
  • Five rods per pack give plenty of spares
  • Light 37 g total weight keeps models agile

Specifications

BrandUnique Bargains
TypeOther Accessories
ModelRC Car & Truck

Questions about this item

What diameter hole or slot do I need for the 2 mm stainless steel rods?

Each rod measures 2 mm in diameter, so a 2 mm clearance hole or slot is required for a snug fit.

How do I cut the 250 mm rods to length without bending them?

Clamp the rod firmly in a vice, then use a fine-tooth hacksaw or rotary tool with a metal-cutting disc; deburr the cut end before assembly.

Will the stainless steel rods rust or need lubrication over time?

The stainless steel resists corrosion in normal indoor use and does not require lubrication; wipe clean if they become dirty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.