We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10mm 4-pin male-to-male LED strip connectors

Unique-Bargains

Unique-Bargains 4-Pin 10mm Male-to-Male LED Connector Black

SKU CH-4EBM-26QB6

Connects RGB LED strip lights with a 4-pin male-to-male design for 10mm strips

  • 4-pin male-to-male design links RGB LED strips directly
  • 10 mm width fits standard RGB strip connectors
  • 54 mm pin pitch matches common header spacing
  • Black colour blends with dark strip housings

RGB LED strip connector pack

This pack contains ten black 4-pin male-to-male connectors sized for 10mm wide RGB LED strips. They join two strip sections or link a strip to a controller without soldering. The 2.54mm pin pitch matches standard RGB headers. Builders extending or repairing linear lighting runs will find the quantity practical.

Solder-free thermal and electrical fit

The connectors pass the full current of typical RGB strips while adding negligible resistance, so voltage drop stays minimal across the joint. No active cooling is involved and the plastic housing remains at ambient temperature during normal operation. Installation is silent and requires no external power beyond the strip supply.

Highlights

  • 4-pin male-to-male design links RGB LED strips directly
  • 10 mm width fits standard RGB strip connectors
  • 54 mm pin pitch matches common header spacing
  • Black colour blends with dark strip housings

Specifications

BrandUnique Bargains

Questions about this item

How do I install the 4-pin 10mm male-to-male connector on my RGB LED strip without damaging the pins?

Align the 2.54mm pitch pins with the strip's contact pads, ensuring the 10mm width matches, then press firmly until seated; the common mistake is forcing the connector at an angle which bends the delicate pins.

Will the connector need replacement due to oxidation or heat cycling over time?

The black plastic housing and metal pins are rated for standard indoor LED voltages; inspect annually for discolouration or loose fit caused by thermal expansion, replacing only if intermittent flicker appears.

More in Light Kits

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.