Unique-Bargains
Unique-Bargains 3mm x 5mm Silicone Rubber Tube Green 1m
Green silicone rubber tube with 3 mm inner and 5 mm outer diameter, resistant from -40 °C to 180 °C, supplied in a 1 metre length
- High temperature resistance from -40 to 180 Celsius
- Oil and waterproof construction protects against fluid damage
- Environmentally friendly material is harmless and low odour
- Flexible 3.3 ft length suits various pump applications
- Lightweight 17 g design allows easy handling and installation
Silicone Rubber Tube for Pump and Transfer Use
This green silicone rubber tube suits electricians, hobbyists and technicians who need a flexible line for pump and transfer tasks. The material is anti-oil, waterproof, environmentally friendly and harmless with a soft feel. It resists aging and heat while producing low odour during use.
Replaces Worn or Unsuitable Tubing in Fluid Systems
Swap this tube in when existing hose has hardened, cracked or cannot handle the required temperature span. The silicone construction withstands continuous exposure from minus 40 up to 180 Celsius degree. The jump is worth it when the application demands anti-aging performance and easy disposal after service life.
Check Inner and Outer Diameters Before Ordering
Verify that a 3mm inner diameter and 5mm outer diameter match the barbs or fittings on your equipment. The total length supplied is 1 metre, approximately 3.3 feet, and the net weight is 17g. Ensure the green colour coding fits your identification scheme and that the operating range covers your system extremes.
Highlights
- High temperature resistance from -40 to 180 Celsius
- Oil and waterproof construction protects against fluid damage
- Environmentally friendly material is harmless and low odour
- Flexible 3.3 ft length suits various pump applications
- Lightweight 17 g design allows easy handling and installation
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Will the 3 mm inner diameter fit over a 2 mm probe?
The tube has a 3 mm inner diameter and 5 mm outer diameter, so a 2 mm probe will slide inside with a small clearance.
How do I cut the 1 metre length without crushing the 5 mm wall?
Use a sharp knife or scissors and make a single clean cut; squeezing the tube while cutting flattens the 0.2 inch wall and makes rejoining harder.
When should I replace the tube if it runs at 180 °C?
At the 180 °C limit the silicone will gradually harden; plan to replace it once the material feels brittle or shows surface cracks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



