Unique-Bargains 3 Pcs PCB Mounting 4 Pin Mini Din F S-Video Adapter Socket Replacement

PCB-mount S-Video socket kit

This pack contains three 4-pin Mini DIN female sockets designed for direct PCB mounting. They replace worn or damaged S-Video ports on audio-video equipment, capture cards or custom panels. The black-and-silver metal-and-plastic housings measure 2.5 x 1.3 x 1.8cm and weigh 8 g total. Installation requires a 2.5 mm board hole per connector.

Replaces broken panel ports

Use these when an existing S-Video jack has bent pins, cracked housing or intermittent contact and the board layout matches the 2.5 mm hole pitch. The jump is worth it if the device still functions but the video output is unreliable and a surface-mount or differently spaced footprint is not an option. They are not for builders who need a different pin count, a right-angle orientation or a cable-end plug instead of a chassis socket.

Check board spacing and pinout

Verify that your PCB has three 2.5 mm mounting holes on the correct centre spacing and that the four signal pins align with the existing trace layout. Confirm the chassis cut-out accepts the 2.5 x 1.3 cm body and that the 1.8 cm height clears any adjacent components. No solder-wicking or re-flow profile data is supplied, so plan your own hand-soldering or wave-solder process accordingly.