Unique-Bargains 20mm ID 1.5M Flexible Corrugated Hose

20 mm inner-diameter corrugated hose

This 20 mm inner-diameter corrugated hose is built for routing and protecting cables or piping in industrial and automotive settings. The flexible plastic construction allows it to bend around tight corners without kinking. It suits installers who need a lightweight, cut-to-length sleeve for wire management or fluid transfer.

Replaces rigid conduit and basic sleeving

Rigid conduit cannot follow complex paths and standard sleeving offers little crush resistance, so this corrugated tube bridges the gap when vibration or thermal movement must be absorbed. The bellows profile compresses and extends as equipment shifts, reducing stress on connections. The jump is worth it whenever fixed tubing would fatigue or chafe against moving parts.

1.5 metre length with 25 mm outer diameter

At 1.5 metres long the coil covers typical engine-bay or cabinet runs with a single piece, and the 25 mm outer diameter fits through common bulkhead openings. The 92 g weight adds negligible mass to harnesses. It runs out when a continuous run exceeds 1.5 metres or when an application demands a higher temperature rating than standard plastic provides.