We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spool of thin silver-grey Nichrome resistance wire

Unique-Bargains

Unique-Bargains 15M AWG32 Nichrome Resistance Wire 0.2mm 34.7Ohm/M

SKU CH-Y51B-D9YXT

15 metre Nichrome wire at 34.7 Ω/m withstands 1400 °C for heating elements and lab use

  • Features15Meter;Resistance Wire;for Frigidaire Heater;for Heating El
  • 15 m continuous length gives plenty of wire for large heating projects
  • 2 mm AWG32 diameter suits precision coil winding and tight spaces
  • 7 Ω/m resistance enables predictable heat output calculations
  • Withstands 1400 °C for reliable operation in furnaces and kilns
  • Compact 23 × 16 mm roll stores easily on a workbench

Nichrome wire for heating elements

This 15 metre roll of AWG32 Nichrome resistance wire measures 0.2 mm in diameter and provides 34.7 ohms per metre. It withstands continuous temperatures up to 1400 °C (2550 °F) and is suited for fabricating replacement elements in hair dryers, ovens, toasters, kilns and similar appliances. The compact spool dimensions are 23 x 16 mm.

Replaces worn or broken element wire

Use this wire when an existing heating element has failed and a direct rewire is more practical than sourcing a pre-formed element. The jump is worth it if you can wind coils to the original geometry and the appliance operates within the wire's temperature limit. It is not for buyers who need insulated lead wire or a ready-to-install cartridge heater.

Verify voltage, wattage and coil form

Confirm the supply voltage and target wattage so the required length and coil diameter match the 34.7 Ω/m specification. Ensure the appliance interior can accommodate the coil size implied by the 0.2 mm wire and that terminal connections can handle the operating temperature. No crimp terminals or insulation are included.

Highlights

  • 15 m continuous length gives plenty of wire for large heating projects
  • 2 mm AWG32 diameter suits precision coil winding and tight spaces
  • 7 Ω/m resistance enables predictable heat output calculations
  • Withstands 1400 °C for reliable operation in furnaces and kilns
  • Compact 23 × 16 mm roll stores easily on a workbench

Specifications

BrandUnique Bargains
Features15Meter;Resistance Wire;for Frigidaire Heater;for Heating Elements;Widely Use

Questions about this item

What diameter hole or groove is needed for the 0.2 mm AWG32 wire?

The wire is 0.2 mm thick, so any guide, ceramic bead or drilled hole must be slightly larger than 0.2 mm to allow free movement during heating cycles.

How do you secure the nichrome ends without creating a high-resistance joint?

Use crimped stainless-steel ferrules or spot-welded tabs; twisting bare wires together adds resistance and fails at 1400 °C.

When should the 15 m roll be replaced in a continuous kiln element?

Replace the wire once oxidation makes the surface brittle or the measured resistance per metre drifts above 34.7 Ω, indicating cross-section loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.