Unique-Bargains
Unique-Bargains 15 Pcs Rubber Strain Relief Cord Boot Protector 26mm
Protects cable ends on power tools and aviation plugs with fifteen black rubber boots measuring 26 mm long and a 10 mm mounting slot
- FeaturesPower Tool Hoses;Protective Hose;Spare Parts;Cable Sleeve;Co
- Protects cables from bending damage with 26mm rubber strain relief boots
- 15-piece pack supplies spares for multiple power tools or aviation plugs
- 10mm mounting slot fits common drill and tool cable diameters
- 7mm inner diameter grips wires securely without crushing insulation
- Lightweight 25g total weight adds negligible bulk to tool assemblies
15-piece rubber cord boot kit
This kit supplies fifteen black rubber strain-relief boots sized for 26 mm overall length. Each boot fits a 10 mm mounting slot and a 7 mm inner diameter to shield cable exits on aviation plugs and power-tool cords. The lightweight 25 g pack is aimed at electricians and technicians who regularly terminate or repair flexible leads.
Heat, noise and power in use
These passive rubber sleeves generate no heat, emit no noise and draw no power during operation. They simply absorb bend stress at the connector junction so the cable insulation and conductor strands are not fatigued by repeated flexing. No active cooling or electrical supply is involved.
Replaces worn or missing original boots
The protectors directly substitute factory-fitted strain reliefs that have cracked, hardened or been lost during servicing. The upgrade is worthwhile whenever a cable shows early jacket damage at the plug entry or when a tool sees frequent movement that would fatigue an unprotected lead. They do not add length, shielding or any electrical rating beyond mechanical relief.
Highlights
- Protects cables from bending damage with 26mm rubber strain relief boots
- 15-piece pack supplies spares for multiple power tools or aviation plugs
- 10mm mounting slot fits common drill and tool cable diameters
- 7mm inner diameter grips wires securely without crushing insulation
- Lightweight 25g total weight adds negligible bulk to tool assemblies
Specifications
| Brand | Unique Bargains |
|---|---|
| Features | Power Tool Hoses;Protective Hose;Spare Parts;Cable Sleeve;Cord Protector |
Questions about this item
How do I install these 26 mm rubber boots on a 10 mm mounting slot, and what step do people miss?
Slide the 7 mm inner diameter over the cable first, then push the flange into the 10 mm slot until it seats fully; the common miss is forgetting to deburr the slot edge, which tears the rubber during insertion.
What maintenance or replacement will these 15 black cord protectors need over time?
Inspect each boot every few months for cracks, hardening or split seams; replace any that show UV degradation or loss of elasticity so the cable bend radius stays protected.
What limit appears first when these strain-relief boots see sustained flexing on a power-tool lead?
The 7 mm bore grips the wire, so repeated sharp bends concentrate stress at the flange base; the rubber there fatigues and splits before the 26 mm body shows wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
