We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 12-pin flat ribbon cable with FC/FC connectors, 1m length

Unique-Bargains

Unique-Bargains 12 Pin 2.54mm Pitch FC/FC Ribbon Cable 1m Gray

SKU CH-TXA0-JXKV4

Connects 12-pin IDC headers at 2.54 mm pitch with a 1 m gray FC-to-FC ribbon cable 15.3 mm wide

  • TypeCable Connectors
  • 12-pin FC/FC ribbon cable simplifies board-to-board links
  • 54 mm pitch matches standard header spacing for drop-in use
  • 1 m / 3.3 ft length gives routing flexibility in enclosures
  • 3 mm / .6 inch width fits tight chassis channels
  • Flat ribbon separates cleanly for quick IDC or pin-header termination

12-pin flat ribbon cable

This 12-pin flat ribbon cable connects two FC-type headers with a 2.54mm pitch. It suits hobbyists and technicians who need a compact link for AVR JTAG debuggers, ISP programmers or internal board-to-board wiring. The one-metre length gives enough reach for typical bench or enclosure routing.

Pin pitch and connector orientation

The critical specification is the 2.54mm pin pitch combined with the A-type FC-to-FC connector arrangement. If the target header uses a different pitch or requires a B-type crossover, this cable will not mate correctly and signal integrity will fail.

Simple press-fit installation

Installation is a straight press-fit onto matching 12-pin headers; no tools or soldering are required. The most common error is reversing one connector, which swaps the pin order because the A-type wiring is straight-through. Verify the keying notch or pin-one marker on both headers before seating the cable.

Highlights

  • 12-pin FC/FC ribbon cable simplifies board-to-board links
  • 54 mm pitch matches standard header spacing for drop-in use
  • 1 m / 3.3 ft length gives routing flexibility in enclosures
  • 3 mm / .6 inch width fits tight chassis channels
  • Flat ribbon separates cleanly for quick IDC or pin-header termination

Specifications

BrandUnique Bargains
TypeCable Connectors

Questions about this item

How many conductors does the 12-pin 2.54mm pitch ribbon cable provide for a board-to-board link?

The cable carries twelve conductors on a 2.54mm pitch, giving a 15.3mm wide flat ribbon that plugs directly into matching FC headers.

What does the FC-to-FC A-type connector arrangement mean for mating orientation?

Both ends use the same A-type FC connector, so the cable connects two identical headers without a twist or gender change.

What clearance is needed to route the 1-metre gray ribbon inside a chassis?

The ribbon is 15.3mm wide and 1 metre long, so allow at least that width plus bend radius when laying it between boards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.