Vszerda
Vszerda LM4040 Precision Voltage Reference Module 2.048V 4.096V passive component
$17.99
0.00021554BTC
In stock
Unique-Bargains
Unique-Bargains 10x 25V 1000µF 105°C Radial Capacitor 10x20mm
Pack of ten radial aluminium electrolytic capacitors rated 1000 µF at 25 V with 105 °C endurance
- 105 °C rating suits high-temperature applications
- 25 V 1000 µF capacitance covers common repair needs
- Radial lead with 4 mm spacing fits standard board layouts
- Pack of 10 capacitors supports multiple projects
- Polarised design with longer positive lead simplifies installation
Pack of Ten 1000 µF Radial Capacitors
This pack contains ten aluminum electrolytic capacitors rated at 1000 µF and 25 V. Each unit has a 105 °C maximum temperature rating and a 20 % capacitance tolerance. The radial leads are spaced at 4 mm with lengths of 27 mm and 21 mm. They are general-purpose components for circuit repair and prototyping.
Suitable for hobbyists repairing power supplies
Builders needing surface-mount parts or higher voltage ratings should look elsewhere. Projects requiring tighter tolerance or non-polarized types are not served by this pack. The 10 mm diameter and 20 mm body length also limit use in very dense boards.
1000 µF capacitance at 25 V defines the application
This single value determines whether the part matches a schematic or replacement list. The 105 °C rating supports hot environments such as power-supply outputs. Verify the required capacitance and voltage before ordering.
Highlights
- 105 °C rating suits high-temperature applications
- 25 V 1000 µF capacitance covers common repair needs
- Radial lead with 4 mm spacing fits standard board layouts
- Pack of 10 capacitors supports multiple projects
- Polarised design with longer positive lead simplifies installation
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How much heat can the 105°C rated capacitor handle during continuous daily operation?
The 105°C maximum temperature rating allows the capacitor to run reliably in warm enclosures such as power supplies or amplifiers where internal temperatures rise during all-day use.
What lead spacing and diameter must my PCB holes accommodate for the 4mm pitch radial leads?
The leads sit on a 4mm pitch with a typical radial diameter; drill holes to match 0.16 inch spacing and ensure the 21mm or 27mm lead lengths reach through your board thickness.
Will the 10x20mm body fit alongside legacy through-hole parts on an older motherboard recap project?
The 10mm diameter and 20mm height match many vintage computer motherboard layouts, so the capacitors sit flush with original components without blocking adjacent sockets or heatsinks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
