We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two gold aluminium-clad wirewound resistors with axial leads and mounting holes

Unique-Bargains

Unique-Bargains 10W 3000 Ohm Aluminum Clad Wirewound Resistors 2 Pcs

SKU CH-3H7S-ZPMP1

Two 10-watt 3000-ohm wirewound resistors with aluminum housings, axial leads and screw-mount tabs for power-supply or industrial use

  • Featuresaxial lead;screw mounted;aluminum housing;easy installation;
  • 10 W power rating handles demanding circuits
  • 3000 Ω precision value ensures accurate resistance
  • Aluminium clad housing dissipates heat efficiently
  • Axial leads with screw mounting simplify installation
  • Compact 65 mm length fits tight enclosures

Two 3000 ohm 10 W resistors

This pack contains two aluminium-clad wirewound resistors rated at 3000 ohms and 10 watts each. They feature screw-mount tabs and axial leads for secure circuit attachment. The gold-tone aluminium housing provides mechanical protection and heat dissipation. Suitable for power-supply, transducer, elevator and similar industrial equipment.

Builders needing axial screw-mount parts

These suit technicians assembling or repairing equipment that requires through-hole, chassis-mounted power resistors. The 0.6 mm lead diameter and 2 mm mounting hole match standard PCB and panel layouts. Buyers who need surface-mount components, different resistance values, or higher power ratings should look at other parts.

Straightforward chassis mounting

Insert the leads through the board or terminal strip and secure the aluminium body with a screw through the 2 mm hole. The 19 mm body length and 11 mm width fit typical power-supply layouts. Misalignment of the mounting hole or excessive lead bending during installation can stress the ceramic core and cause open-circuit failure.

Highlights

  • 10 W power rating handles demanding circuits
  • 3000 Ω precision value ensures accurate resistance
  • Aluminium clad housing dissipates heat efficiently
  • Axial leads with screw mounting simplify installation
  • Compact 65 mm length fits tight enclosures

Specifications

BrandUnique Bargains
Featuresaxial lead;screw mounted;aluminum housing;easy installation;high insulation

Questions about this item

What mounting hole diameter does the 2 mm hole on the aluminum housing require?

The resistor body has a 2 mm mounting hole diameter, so a matching M2 screw or 2 mm clearance hole in your chassis will secure it.

Will the 0.6 mm axial leads fit into the same through-hole pads I use for 1/4 W carbon-film resistors?

The 0.6 mm lead diameter matches standard 0.024 inch plated through-holes used for typical 1/4 W axial resistors, so existing pad layouts will accept these leads.

How can I confirm the 3000 ohm value is correct after soldering the resistors into my power supply board?

Measure across the leads with a multimeter set to resistance mode; a reading near 3000 ohms indicates the wirewound element is intact and correctly installed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.