We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic battery holder with switch and wire leads

Unique-Bargains

Unique-Bargains 10 Pcs CR2032 Battery Holder Case Box Switch

SKU CH-PT3A-6W73T

Holds two CR2032 cells with a built-in switch and 15 cm leads, supplied as a pack of ten

  • TypeBattery Protectors
  • Holds two CR2032 cells for 6 V output
  • Built-in on/off switch controls power without unplugging
  • 15 cm cable length gives flexible placement options
  • Compact 52 x 23 mm body fits tight project spaces
  • Pack of 10 holders covers multiple builds

10-pack CR2032 holder with switch

This pack contains ten black plastic cases that each hold two CR2032 coin cells and include an integrated on/off switch. The holder measures 52 by 23 millimetres and weighs 49 grams per unit. A 15-centimetre twin-lead cable exits the case for direct wiring to low-voltage projects.

Replaces loose cells and tape

Builders who currently tape bare CR2032 cells together or solder directly to battery tabs can switch to this holder for a secure, reversible connection. The jump is worth it when a project needs quick battery changes or a reliable power cutoff without desoldering.

Check voltage and space before ordering

Each holder delivers 6 volts from two series cells, so confirm the circuit tolerates that level. Verify the 52 by 23 millimetre footprint and 15-centimetre lead length fit inside the enclosure or drone frame. Batteries are not included.

Highlights

  • Holds two CR2032 cells for 6 V output
  • Built-in on/off switch controls power without unplugging
  • 15 cm cable length gives flexible placement options
  • Compact 52 x 23 mm body fits tight project spaces
  • Pack of 10 holders covers multiple builds

Specifications

BrandUnique Bargains
TypeBattery Protectors

Questions about this item

How much clearance do the 52 x 23 mm case and 20 mm battery diameter need inside a project enclosure?

The holder measures 52 mm long by 23 mm wide, and each CR2032 cell sits in a 20 mm diameter well, so allow at least that footprint plus the 15 cm lead wires.

Which step do builders most often miss when wiring the 15 cm leads and on/off switch?

Forgetting to slide the switch to OFF before soldering the double wire leads, which can short the two CR2032 cells during installation.

When should the plastic case or metal contacts be replaced after repeated battery swaps?

Replace the holder if the black plastic cover cracks, the metal contacts lose spring tension, or the on/off switch no longer clicks firmly after many CR2032 changes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.