We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular NiMH battery pack with two metal contacts, white label showing Uniden BT-1007 600mAh 2.4V

Uniden

Uniden BT-1007 NiMH 600 mAh 2.4 V cordless telephone battery

SKU CH-3SB3-V2X04

NiMH 600 mAh 2.4 V rechargeable battery compatible with Uniden DECT 6.0, 2.4 GHz and 900 MHz cordless phone models

  • Compatible with many Uniden DECT 6.0 phones
  • Replaces multiple original battery part numbers
  • NiMH chemistry provides reliable rechargeable power
  • 600 mAh capacity supports long talk time
  • 4 V output matches handset requirements

Compatible Uniden DECT 6.0 Handsets

This 2.4 V NiMH pack replaces the original BT-1007 cell in a long list of Uniden DECT 6.0 cordless phones. It also fits legacy 2.4 GHz and 900 MHz models such as the EXP4540 and EPX3000 series. Buyers who need a different voltage or connector should verify their handset specification before ordering.

Low Self-Discharge Chemistry

The 600 mAh nickel-metal-hydride construction holds charge during standby and delivers stable talk current without memory effect. Normal office use sees minimal heat rise and no audible noise from the pack itself. Users who require extended talk time beyond the rated capacity will need a higher-capacity alternative.

Direct Drop-In Replacement

The battery ships ready to install with no soldering, adapters or firmware updates required. It matches the physical dimensions and polarity of the original Uniden pack and the listed cross-reference part numbers. Buyers expecting a charging cradle, belt clip or desktop software in the box will not find them included.

Highlights

  • Compatible with many Uniden DECT 6.0 phones
  • Replaces multiple original battery part numbers
  • NiMH chemistry provides reliable rechargeable power
  • 600 mAh capacity supports long talk time
  • 4 V output matches handset requirements

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the BT-1007 battery in my Uniden DECT 6.0 handset, and what is the step people often miss?

Open the battery compartment, disconnect the old pack, connect the new BT-1007 plug matching the polarity, then place the pack in the cavity and close the cover. The step often missed is charging the handset on the base for at least 15 hours before first use.

What maintenance or replacement will the BT-1007 NiMH 600 mAh 2.4 V battery need later?

The NiMH pack will gradually lose capacity after several hundred charge cycles. When talk time drops noticeably, replace it with another BT-1007 or a compatible model such as BT-1015, BT-904 or BBTY0655001.

What limit appears first during sustained use of the BT-1007 in a Uniden DECT 6.0 phone?

The 600 mAh capacity sets the runtime limit. Under continuous talk the handset will need recharging after roughly the rated talk-time hours, and the battery will warm up before any other component reaches a limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.