We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange and yellow square polyurethane drain seal 24 in L 500 mil

Ultratech, Inc.

Ultratech, Inc. 2167 Drain Seal 24 in L 500 mil

SKU CH-F9YS-59E0S

Reusable 24-inch square polyurethane drain seal fits drains up to 18 inches and withstands 225°F for 30 minutes

  • Seals drains up to 18 in with 24 in polyurethane cover
  • Withstands 225°F liquid for 30 min during spill response
  • Reusable positive seal meets NPDES and SPCC standards
  • Operates reliably from 0°F to 160°F in storage and use
  • 500 mil thickness provides durable chemical-resistant barrier

Ultratech 2167 Drain Seal 24 in

The Ultratech 2167 is a reusable polyurethane drain seal designed for spill containment and environmental compliance. It creates a positive seal over square drains up to 18 in by 18 in to prevent liquids from entering drainage systems. The 24 in by 24 in orange and yellow mat suits industrial sites, workshops and transport depots needing NPDES and SPCC adherence.

Installation ease and common issues

Place the seal flat over the drain so the material covers the entire opening; the 500 mil thickness helps it conform to irregular surfaces without mechanical fasteners. Ensure the drain dimensions do not exceed 18 in by 18 in or the seal will not achieve full contact. The mat withstands liquid temperatures up to 225F for 30 min and continuous exposure to 160F, but exceeding these limits can degrade the polyurethane.

Pre-order checks for your setup

Verify the target drain is square and no larger than 18 in by 18 in so the 24 in mat overlaps adequately. Confirm the maximum liquid temperature in your application stays within the 225F short-term and 160F continuous ratings. Check that storage conditions remain between 0F and 120F to preserve material integrity before deployment.

Highlights

  • Seals drains up to 18 in with 24 in polyurethane cover
  • Withstands 225°F liquid for 30 min during spill response
  • Reusable positive seal meets NPDES and SPCC standards
  • Operates reliably from 0°F to 160°F in storage and use
  • 500 mil thickness provides durable chemical-resistant barrier

Specifications

BrandULTRATECH

Questions about this item

How do I confirm the seal is forming a positive seal after placing it over the drain?

The seal is working when it creates a positive seal over the drain opening. It fits drains up to 18 in L x 18 in W and the 500 mil thick polyurethane material conforms to the surface to block flow.

What comes in the box and is any extra hardware needed for installation?

The box contains the 24 in L x 24 in W orange and yellow polyurethane drain seal. No additional hardware or tools are required; the seal is placed directly over the drain and is reusable.

Which capacity or version should I choose for my application?

This model 2167 is a 24 in square seal rated for 500 mil thickness, max liquid temperature 225F for 30 min, and continuous use up to 160F. It meets NPDES and SPCC standards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.