We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange polyurethane square drain seal 24 in 375 mil

Ultratech, Inc.

Ultratech, Inc. 2127 Drain Seal 24 in 375 mil personal protective equipment

SKU CH-84VM-3PDPR

A 24-inch square polyurethane drain seal rated for positive sealing up to 18-inch drains, reusable and resistant to temperatures up to 225°F for 30 minutes

  • Seals drains up to 18 in with 24 in polyurethane barrier
  • Withstands 225 °F liquid exposure for 30 minutes
  • Reusable positive seal meets NPDES and SPCC standards
  • Tear‑resistant 375 mil material handles 0 to 160 °F operating range
  • Bright orange square cover ensures visible spill containment

Ultratech 2127 Drain Seal 24 in

The Ultratech 2127 is a square polyurethane drain seal measuring 24 in by 24 in. It creates a positive seal over drains up to 18 in by 18 in to stop liquid flow during spills or maintenance. The bright orange colour makes it easy to spot on busy industrial sites. Workers handling hazardous fluids use it to meet NPDES and SPCC containment requirements.

Thermals noise and power draw

The seal operates passively with no moving parts so it generates no noise and draws no power. It withstands continuous temperatures up to 160 Degrees F and short exposures of 225 Degrees F for up to 30 min. Storage limits range from 0 Degrees F to 120 Degrees F without degrading the polyurethane. These ranges cover typical outdoor and indoor industrial environments.

Sustained load behaviour

Under continuous chemical contact the material remains tear resistant and reusable for repeated deployments. The 375 mil thickness maintains its shape and sealing force over long periods without permanent deformation. California Proposition 65 warnings note the presence of chemicals linked to cancer and reproductive harm so proper handling procedures apply. It is not suited for drains larger than 18 in or for permanent installation.

Highlights

  • Seals drains up to 18 in with 24 in polyurethane barrier
  • Withstands 225 °F liquid exposure for 30 minutes
  • Reusable positive seal meets NPDES and SPCC standards
  • Tear‑resistant 375 mil material handles 0 to 160 °F operating range
  • Bright orange square cover ensures visible spill containment

Specifications

BrandULTRATECH

Questions about this item

How do I install the 24 in polyurethane drain seal on an 18 in drain, and what step do people often miss?

Center the square seal over the drain so the 24 in edges extend evenly beyond the 18 in opening, then press firmly from the middle outward to create the positive seal; the step often missed is ensuring full perimeter contact before any liquid contacts the surface.

What maintenance or replacement will the 375 mil polyurethane seal need after repeated use?

Inspect the seal after each deployment for tears or permanent deformation; the material is tear resistant and reusable, but replace it if cuts, loss of tack, or heat damage above 160 Degrees F appear.

What is the first limit reached when the seal is exposed to hot liquid during sustained use?

The maximum liquid temperature exposure is 225 Degrees F for up to 30 minutes; exceeding either the temperature or the time limit will degrade the polyurethane before the 160 Degrees F continuous rating becomes relevant.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.