Ultimaxx
Ultimaxx TTL Dedicated Slave Flash LCD Swivel Bounce Case for Nikon
iTTL flash for Nikon with swivel head, LCD and slave modes up to 98 ft
- iTTL metering for accurate Nikon flash exposure
- Swivel bounce head tilts 90° and rotates 180°
- Slave range reaches 98 ft indoors and 45 ft outdoors
- Built-in diffuser and reflector soften light output
- Recycles in 2.9 seconds for rapid shooting
Nikon iTTL Slave Flash with Swivel Head
The Ultimaxx TTL Dedicated Slave Flash is designed for Nikon cameras that use iTTL metering. It provides a guide number of 56 at ISO 100 and 180mm coverage. The unit includes a built-in diffuser and reflection card for softer lighting. It runs on four AA alkaline or Ni-MH batteries and comes with a protective case, stand, and pouch.
Wireless Slave Range and Channel Control
The flash operates as a wireless slave with indoor triggering distances of 65 to 98 feet and outdoor distances of 32 to 45 feet. It offers four communication channels and three slave unit groups for multi-flash setups. The head tilts vertically from 7 to 90 degrees and rotates horizontally 180 degrees. Recycle time is 2.9 seconds with a flash duration range of 1/200 to 1/20000 seconds.
Hot Shoe Mounting and Overheat Protection
The metal hot shoe secures directly to the camera or a compatible stand. PC sync and external charge ports provide wired alternatives. An overheat protection circuit activates during extended use, which may pause firing until the unit cools. Power saving mode helps extend battery life across 100 to 1500 flashes per charge cycle.
Highlights
- iTTL metering for accurate Nikon flash exposure
- Swivel bounce head tilts 90° and rotates 180°
- Slave range reaches 98 ft indoors and 45 ft outdoors
- Built-in diffuser and reflector soften light output
- Recycles in 2.9 seconds for rapid shooting
Specifications
No published specifications for this item yet.
Questions about this item
How far can the wireless slave trigger reach indoors and outdoors?
The wireless induction slave mode reaches 65-98 feet indoors (20-30 meters) and 32-45 feet outdoors (10-15 meters).
What hot shoe and sync interfaces does the flash provide?
It mounts on a metal hot shoe and includes a PC sync socket plus an external charge port for power accessories.
How much does the unit weigh and will it balance on a Nikon body?
The flash weighs 13.22 ounces (375 grams) and measures 7.87 x 2.95 x 2.24 inches, mounting directly on the camera's hot shoe.
More in Camera Flashes
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.





