We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 24-port network switch with a 1.3 inch color touchscreen and SFP+ ports

Ubiquiti Networks

Ubiquiti Networks UISP Switch Pro 24-port PoE network switch

SKU CH-RXMY-RZ2B0

A 24-port Layer 2 PoE switch with 16 passive PoE ports, four 10G SFP+ ports, 220W total PoE budget and a 1.3" LCM touchscreen

  • 24 Gigabit RJ45 ports for dense device connectivity
  • 16 ports deliver 27 V passive PoE to power cameras
  • 220 W total PoE budget with 15 W or 30 W per port
  • Four 10G SFP+ uplinks for high-speed aggregation
  • 3" LCM touchscreen and Bluetooth setup via UISP app

24-port PoE switch with 10G uplinks

This Ubiquiti Networks switch provides 24 Gigabit RJ45 ports and four 10G SFP+ ports for aggregation. Sixteen ports deliver 27V passive PoE with a 220W total budget. A 1.3" LCM colour touchscreen and Bluetooth setup via the UISP Mobile app simplify local management.

Suited for ISP and surveillance installs using

The switch fits networks that can use 27V passive PoE at up to 30W per port on four-pair cabling. Installers who require active PoE negotiation or standard voltage levels should look elsewhere. Buyers needing more than 220W of PoE budget or more than four 10G uplinks should also consider other options.

220W total PoE budget at 27V

The 220W limit across 16 powered ports is the single figure that determines whether the switch can support your camera or access-point deployment. Each port can supply 15W on two-pair or 30W on four-pair connections, but the combined draw must stay within the 220W ceiling.

Highlights

  • 24 Gigabit RJ45 ports for dense device connectivity
  • 16 ports deliver 27 V passive PoE to power cameras
  • 220 W total PoE budget with 15 W or 30 W per port
  • Four 10G SFP+ uplinks for high-speed aggregation
  • 3" LCM touchscreen and Bluetooth setup via UISP app

Specifications

No published specifications for this item yet.

Questions about this item

Does the UISP Switch Pro need a separate power source to deliver its 220 W PoE budget?

The switch draws mains power internally and distributes up to 220 W of 27 V passive PoE across its 16 powered RJ45 ports.

Will the four 10G SFP+ ports link to my existing 1 GbE copper uplinks?

The 10G SFP+ ports require compatible SFP+ modules; they do not accept RJ45 copper directly, so 1 GbE copper uplinks need 10G copper SFP+ transceivers.

How can I confirm the 1.3" LCM touchscreen shows the switch is passing traffic on all 24 ports?

The touchscreen displays real-time port status, PoE load per port and aggregate power draw so you can verify every active connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.