We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver with blue latch and duplex LC ports

Ubiquiti Networks

Ubiquiti Networks UACC-OM-SM-10G-D-2 SFP transceiver 10Gbps 10km SM 1310nm

SKU CH-3HN5-BZNT7 MPN UACC-OM-SM-10G-D-2

Single-mode SFP transceiver delivers 10 Gbps over 10 km via duplex LC connectors

  • Form FactorSFP
  • WavelengthTX wavelength: Blue latch: 1310 nm RX wavelength: Blue latch
  • Fiber CableSingle-mode Optical Fiber
  • PortsDuplex LC UPC connector
  • Max Distance10Km
  • Transfer Rate10 Gbps
  • 10 Gbps throughput for high-speed links
  • Duplex LC connector for simple patching
  • 10 km reach over single-mode fibre
  • 1 W power draw keeps runs cool
  • Operates 0 to 70 °C for indoor use

10 Gbps SFP transceiver for single-mode fibre

The Ubiquiti UACC-OM-SM-10G-D-2 is a small form-factor pluggable module that delivers 10 Gbps throughput over duplex LC single-mode fibre. It suits network engineers extending links between switches or routers across campus or metro distances. Buyers who need multimode fibre or shorter-reach copper connections cannot use this module.

Operating range 0 to 70°C with 1 W draw

The transceiver runs from 0 to 70 °C (32 to 158 °F) while consuming only 1 W, so it adds minimal heat to a crowded chassis. Low power draw keeps fan speeds down in quiet office or rack environments. No active cooling is required on the module itself.

Duplex LC UPC connectors and blue latch coding

The package provides a blue-latch SFP housing with duplex LC UPC connectors keyed for 1310 nm transmit and receive wavelengths. Fibre cable is not included, so installers must source compatible single-mode patch cords separately. The colour-coded latch simplifies identification during maintenance.

Highlights

  • 10 Gbps throughput for high-speed links
  • Duplex LC connector for simple patching
  • 10 km reach over single-mode fibre
  • 1 W power draw keeps runs cool
  • Operates 0 to 70 °C for indoor use

Specifications

BrandUbiquiti Networks
ModelUACC-OM-SM-10G-D-2
Form FactorSFP
WavelengthTX wavelength: Blue latch: 1310 nm
RX wavelength: Blue latch: 1310 nm
Fiber CableSingle-mode Optical Fiber
PortsDuplex LC UPC connector
Max Distance10Km
Transfer Rate10 Gbps
Power Consumption1W
Temperature0 to 70°C (32 to 158°F)
Shipping weight0.09 kg
Package size127 × 76 × 25 mm

Questions about this item

How do I install the SFP transceiver and which step is commonly missed?

Insert the module into an SFP+ port until it clicks, then connect a single-mode duplex LC patch cord; the step often missed is removing the dust caps from both the transceiver and the patch cord before linking them.

What maintenance or replacement will the UACC-OM-SM-10G-D-2 need over time?

No scheduled maintenance is required; keep the LC connectors clean with a fibre cleaning pen and replace the module only if optical output degrades or a link fails.

What limit appears first when the transceiver runs continuously at 10 Gbps?

The operating temperature ceiling of 70 °C is the first sustained-use limit; ensure adequate airflow so the module stays within the 0 to 70 °C range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.