We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ubiquiti Networks

Ubiquiti Networks POE-15-12W 15V 12W PoE Adapter wireless accessory

SKU CH-FMDA-WZR1Q MPN POE-15-12W

Delivers 15V DC at 0.8A to power compatible Ubiquiti PoE devices with built-in surge protection

  • TypePoE Adapter
  • ColorBlack
  • SpecificationsOutput Voltage: 15V DC @ 0.8A Rated Voltage: 100-240V AC @ 5
  • FeaturesProvides Earth Grounding and Surge Protection Helps Protect
  • Powers Ubiquiti PoE devices reliably
  • Wide 100-240V AC input for global use
  • Earth grounding and surge protection included
  • 15V DC output at 0.8A delivers 12W
  • High efficiency at 75% reduces energy waste

Ubiquiti 15V 12W PoE Adapter

This compact Power over Ethernet adapter delivers 15V DC at 0.8A from a 100-240V AC supply. It provides earth grounding and surge protection for connected devices. The unit operates at 75% efficiency or higher with output ripple limited to 1% maximum. It is designed to power a wide range of Ubiquiti PoE products including airFiber, airMAX, EdgeMAX, mFi, UniFi AP and UniFi Protect devices.

Installers needing a portable 15V power source

Network technicians who require a lightweight, easy-to-deploy adapter for Ubiquiti equipment will find this unit suitable. It works with airGateway models and simplifies installation of IP cameras and wireless access points. Builders needing higher wattage outputs or different voltage levels should look at other solutions. Users with non-PoE devices or proprietary power requirements cannot use this adapter.

12W output for compatible Ubiquiti gear

The adapter comfortably handles standard Ubiquiti access points, IP cameras and airGateway units within its 12W power budget. It accepts worldwide mains voltages at 50/60 Hz with input current of 0.3A at 120V AC or 0.2A at 240V AC. Inrush current stays below 30A peak at 120V AC and 60A peak at 230V AC. Devices demanding more than 12W or voltages other than 15V DC will exceed its capacity.

Highlights

  • Powers Ubiquiti PoE devices reliably
  • Wide 100-240V AC input for global use
  • Earth grounding and surge protection included
  • 15V DC output at 0.8A delivers 12W
  • High efficiency at 75% reduces energy waste

Specifications

BrandUBiQuiTi
ModelPOE-15-12W
TypePoE Adapter
ColorBlack
SpecificationsOutput Voltage: 15V DC @ 0.8A
Rated Voltage: 100-240V AC @ 50/60 Hz
Input Current: 0.3A @ 120VAC,0.2A @ 240VAC
Inrush Current: <30A Peak @ 120V AC, <60A Peak @ 230V AC
Efficiency: 75+%
Output Ripple: 1% Max.
Switching Frequency: 50 kHz
Operating Temperature: 0 to 40 degree C (32 to 104 degree F)
Storage Temperature: 30 to 70 degree C (-22 to 158 degree F)
Operating Humidity: 35 to 95% Noncondensing
FeaturesProvides Earth Grounding and Surge Protection
Helps Protect Against ESD Events
Powers Ubiquiti PoE Devices
Shipping weight0.22 kg
Package size183 × 97 × 41 mm

Questions about this item

What mains voltage range does the POE-15-12W adapter accept?

The adapter accepts 100 to 240 volts AC at 50 or 60 Hz, so it works on standard outlets worldwide without a voltage selector.

Will this 15V 12W adapter power a legacy 24V passive PoE device such as an older NanoStation?

No, the adapter delivers only 15 volts DC at 0.8 amps, while legacy 24V passive PoE gear requires a higher voltage supply.

How can I confirm the adapter is supplying power to a connected UniFi access point after installation?

The access point's status LED will illuminate and the device will appear in the UniFi controller once the adapter is providing 15V DC power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.