U-Reach, Inc.
U-Reach, Inc. USB Duplicator 1:59 2GB/min 33MB/s Golden Series UB960G
Standalone duplicator clones up to 59 USB drives at 33 MB/s with bit-by-bit copy and DoD erase
- Target1 to 59
- Data Transfer Rate2GB/min
- Standalone operation needs no computer or software
- Copies up to 59 drives at 2GB per minute
- Bit-by-bit cloning handles proprietary and unknown formats
- Three erase modes include DoD sanitisation standard
- Modular socket design lets you swap individual ports fast
Standalone USB Duplicator 1:59
The U-Reach UB960G is a completely standalone flash drive copier and eraser that operates without a computer or software. It clones up to 59 target drives simultaneously from a single source, supporting USB 2.0, 3.0 and 3.1 devices as well as external USB-powered hard drives. Optional eUSB adapters for 2.54 mm and 2.00 mm pitch sockets extend compatibility further.
Thermal Noise Power Normal Use
As a standalone desktop duplicator, the unit runs without host CPU load and produces only the acoustic signature of its internal cooling and port activity during copy or erase cycles. Power draw scales with the number of attached drives and the selected operation mode, peaking during simultaneous 33 MB/s transfers across all 59 ports.
Intelligent Copy Erase Quality Tools
Intelligent copy modes include Quick Copy, which copies only the data area for Linux, Mac, NTFS and FAT file systems, and Whole Media bit-by-bit mode with no format limitation. Erase functions provide Quick Erase, Full Erase and DoD Erase sanitisation. Built-in diagnostics run H3 read-only, H5 write/read and H6 quality tests plus capacity and speed checks to identify defective drives before deployment.
Highlights
- Standalone operation needs no computer or software
- Copies up to 59 drives at 2GB per minute
- Bit-by-bit cloning handles proprietary and unknown formats
- Three erase modes include DoD sanitisation standard
- Modular socket design lets you swap individual ports fast
Specifications
| Target | 1 to 59 |
|---|---|
| Data Transfer Rate | 2GB/min |
Questions about this item
How do I set up the standalone duplicator and what is the common mistake with the source drive?
Connect power, insert the source USB drive into the dedicated source port, then insert up to 59 target drives into the target ports and press start; the common mistake is placing the source drive in a target port which prevents the copy from starting.
Which parts can be replaced later without sending the unit for service?
Individual USB ports can be swapped using the modular socket design to reduce downtime when a port becomes worn or damaged.
What limits the sustained copy speed when all 59 ports are loaded?
The peak transfer rate is 33MB per second (2GB per minute) and this bandwidth is shared across all active target ports during simultaneous duplication.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
