Tycon Power
Tycon Power TP-POE-HP-56G 56V 100W Gigabit Passive PoE 2 in 1 accessory
Delivers 56V 100W regulated passive PoE over Gigabit with autoranging 120/240VAC input and shielded surge-protected pinout for access points, IP phones and security cameras
- Delivers 56 V DC at 100 W regulated output for high-power devices
- Gigabit 4-pair passive PoE supplies data and power over one cable
- Auto-ranging 120 / 240 V AC input works worldwide with removable cord
- Shielded surge-protected pinout 3,4,5,6 V+ and 1,2,7,8 V- guards equipment
- Compact floor, desktop or wall-mount design fits tight installation spaces
56V 100W Passive PoE Injector
This injector delivers 56 volts at 100 watts through all four twisted pairs on a single Gigabit Ethernet port. It accepts 120 or 240 volt AC mains input with an autoranging supply and includes a removable power cord. The compact enclosure can be placed on a floor, a desk or mounted on a wall. Shielded connections and surge protection help guard attached equipment.
For remote wireless and camera installs
Installers powering wireless access points, IP phones or security cameras over long cable runs will find the high 100 watt budget and passive four-pair delivery convenient. Sites that lack convenient AC outlets at the device location benefit from the single-cable approach. Networks that rely on active PoE negotiation will not work with this unit, so buyers whose devices require that handshake should choose a different power source.
56 volt four-pair passive output
The defining specification is the 56 volt 100 watt passive PoE output on pins 3,4,5,6 positive and 1,2,7,8 negative. This fixed voltage appears immediately on the Ethernet port without any detection or classification exchange. Match this voltage and pinout exactly to the powered device's requirements before connecting.
Highlights
- Delivers 56 V DC at 100 W regulated output for high-power devices
- Gigabit 4-pair passive PoE supplies data and power over one cable
- Auto-ranging 120 / 240 V AC input works worldwide with removable cord
- Shielded surge-protected pinout 3,4,5,6 V+ and 1,2,7,8 V- guards equipment
- Compact floor, desktop or wall-mount design fits tight installation spaces
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 56V 100W model or a lower-voltage option for my access point?
Choose the 56V 100W unit when your device requires 56VDC and draws up to 100W; lower-voltage injectors will not power 56V equipment.
What does the 100W rating mean once the injector is installed?
It delivers up to 100W of regulated 56VDC over all four PoE pairs, so a connected access point or camera receives full power at Gigabit speeds.
How does the passive PoE interface limit what I can connect?
The injector uses 4-pair passive PoE on pins 3,4,5,6 (V+) and 1,2,7,8 (V-); it only works with devices that accept 56V passive PoE on that pinout.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
