We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal PoE injector with shielded RJ45 ports

Tycon Power

Tycon Power TP-DCDC-1248GD-HP 10-15VDC In 56VDC 802.3af/at Out 35W PoE Injector

SKU CH-RGW5-Q2100

Converts 10–15 VDC battery power to 56 VDC 802.3af/at PoE at up to 35 W over Gigabit Ethernet

  • TypePoE Injector
  • Converts 10-15VDC battery power to 56VDC PoE
  • Delivers 35W compliant with 802.3af/at standards
  • Integrated Gigabit compatible PoE injector included
  • Powers Ethernet pins 4,5 and 7,8 for PoE
  • Shielded RJ45 jacks protect data and power signals

DC-to-DC PoE injector for 12 V battery systems

The TP-DCDC-1248GD-HP converts a 10-15 VDC battery supply into a regulated 56 VDC output that complies with 802.3af/at Power over Ethernet. It delivers up to 35 W through a shielded RJ45 jack while passing Gigabit Ethernet data on the same cable. The unit injects power on the unused pairs 4,5 and 7,8.

Fits between a low-voltage battery and a PoE device

Connect the DC input to a 12 V nominal battery bank and run a single Ethernet cable to the powered device. The integrated injector eliminates the need for a separate PoE midspan or AC mains supply at the remote site. A shielded RJ45 data input accepts the network link and the output jack carries both data and power.

Replaces AC-dependent PoE injectors in off-grid

Use it where mains power is unavailable but a 12 V battery system exists, such as solar-powered cameras or remote wireless bridges. The step-up design is not suitable for installations that already provide 48 VDC or 56 VDC directly. Buyers who need higher than 35 W PoE output or input voltages outside the 10-15 VDC range cannot use this converter.

Highlights

  • Converts 10-15VDC battery power to 56VDC PoE
  • Delivers 35W compliant with 802.3af/at standards
  • Integrated Gigabit compatible PoE injector included
  • Powers Ethernet pins 4,5 and 7,8 for PoE
  • Shielded RJ45 jacks protect data and power signals

Specifications

BrandTycon
TypePoE Injector

Questions about this item

What is the maximum sustained output power before the 35 W limit is reached?

The injector delivers up to 35 W of regulated 56 VDC PoE power compliant with 802.3af/at.

How much heat or noise does the unit produce when running continuously at full load?

The converter operates silently with no moving parts; heat dissipation is handled by the metal enclosure.

Which DC source and cabling must already be in place for the injector to work?

A 10–15 VDC battery supply and shielded CAT5 cable with RJ45 connectors are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.