Tweco
Tweco 95101110 Welding Cable Female Terminal 45° 17/32 in Stud 80V
A 45-degree angled female welding terminal with a 17/32 in stud hole, insulated copper lug and ball-point connection rated to 80V
- TypeWelding Parts & Supplies
- Insulated design prevents accidental contact at 80V
- 45-degree angled lug eases routing in tight spaces
- Ball-point cable connection ensures secure conductor grip
- Copper lug material delivers high conductivity for welding current
- 17/32 in stud hole fits compatible MPC connectors
Tweco 95101110 Welding Terminal
The Tweco 95101110 is a welding cable female terminal designed for MPC connector systems. It suits professionals building or repairing welding leads that require a secure 45-degree angled connection. The lug accepts a 17/32 in stud hole and uses a ball-point cable connection style. Buyers needing straight lugs or different stud sizes cannot use this part.
Thermals Noise and Power Draw
This terminal is a passive copper component with no active cooling or electrical consumption. It produces no audible noise during normal welding operations. The insulated body protects the connection point up to a maximum compatible voltage of 80V. Heat dissipation depends entirely on the cable gauge and duty cycle of the welding machine used.
Sustained Load Behaviour
Under continuous welding current the copper lug maintains conductivity through its 45-degree bend without internal resistance changes. The ball-point connection resists loosening from vibration during prolonged use. Insulation integrity holds at the rated 80V limit across extended duty cycles. The terminal fits manufacturer part numbers 2-MPC and 4-MPC for consistent mating.
Highlights
- Insulated design prevents accidental contact at 80V
- 45-degree angled lug eases routing in tight spaces
- Ball-point cable connection ensures secure conductor grip
- Copper lug material delivers high conductivity for welding current
- 17/32 in stud hole fits compatible MPC connectors
Specifications
| Type | Welding Parts & Supplies |
|---|---|
| Brand | TWECO |
Questions about this item
How do I install the Tweco 95101110 terminal onto the welding cable, and what is the common mistake with the 45-degree angle?
Crimp or solder the cable into the ball-point lug, then bolt the 17/32 in stud hole to the MPC connector; the error is rotating the 45-degree lug so the cable kinks instead of following the natural bend.
What maintenance or replacement will the copper lug and insulation need over time?
Inspect the copper lug for oxidation or pitting after heavy use; replace the terminal if the insulation cracks or the stud hole elongates from repeated bolt torque on the MPC connector.
What limit appears first when running this terminal continuously at high amperage within the 80V rating?
The copper lug temperature rises until the insulation softens or the ball-point connection loosens, so the thermal limit of the insulated lug material is reached before the 80V voltage ceiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
