Turck
Turck NI15U-EM18WD-AP6X-H1141 1634818 inductive sensor PNP M18×1 15mm IP69K
An M18 inductive sensor with 15 mm range, PNP output, IP69K rating and factor 1 for all metals
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Reliable detection on all metals with Factor 1 technology
- Withstands high-pressure washdown at IP69K rating
- Operates in extreme cold to -40 °C and heat to +100 °C
- Resists magnetic interference for stable switching signals
- Durable V4A stainless steel housing with liquid crystal polymer front cap
Industrial inductive sensor
The Turck NI15U-EM18WD-AP6X-H1141 is a non-flush inductive sensor with an M18 × 1 threaded barrel and a 15 mm rated switching distance. It delivers a PNP normally-open output on a three-wire 10…30 VDC supply. The M12 × 1 male connector provides a standard industrial interface for quick installation in automation and process control systems.
Voltage and connector limits
Operation is confined to a 10 to 30 VDC range, so the sensor must be paired with a compatible DC supply. The M12 × 1 connector dictates the cabling choice and limits the electrical interface to three-wire DC signalling. No AC or two-wire variants are supported by this model.
Stainless housing and wash-down rating
The V4A stainless steel body (1.4404) and liquid crystal polymer front cap resist common acid and alkaline cleaning agents. An IP69K rating and a special double-lip seal allow high-pressure, high-temperature wash-down cycles. The sensor withstands -40 °C to +100 °C and is rated for 15 bar mechanical load. Laser-engraved labelling remains legible after repeated cleaning. Buyers needing flush mounting or a different output type should select another model.
Highlights
- Reliable detection on all metals with Factor 1 technology
- Withstands high-pressure washdown at IP69K rating
- Operates in extreme cold to -40 °C and heat to +100 °C
- Resists magnetic interference for stable switching signals
- Durable V4A stainless steel housing with liquid crystal polymer front cap
Specifications
| Brand | TURCK |
|---|---|
| Model | NI15U-EM18WD-AP6X-H1141 1634818 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Which Turck inductive sensor variant offers a 15 mm sensing range in an M18 × 1 housing?
The NI15U-EM18WD-AP6X-H1141 (order 1634818) provides a 15 mm rated switching distance in a non-flush M18 × 1 threaded barrel.
What does the 15 mm rated switching distance mean when the sensor is installed in a machine?
It detects any metal target at up to 15 mm with factor 1 correction, so no reduction factor is needed for aluminium, copper or stainless steel.
What does the M12 × 1 male connector limit in practice?
The 4-pin M12 × 1 connector carries the 10…30 VDC supply and PNP NO output, cabling the sensor to standard DC 3-wire fieldbus or I/O modules.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
