Turck
Turck NI15-S30-AN6X-H1141 46583 inductive sensor NPN M30 15mm 72g
M30 inductive proximity sensor with 15 mm range, NPN output, 10–30 V DC supply and M12 connector
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 15 mm switching distance detects metal targets reliably
- NPN normally-open output simplifies PLC wiring
- M12 connector enables quick installation
- PA12-GF30 housing resists chemicals and impact
- 10 to 30 VDC supply suits standard industrial power
Industrial detection sensor
The Turck NI15-S30-AN6X-H1141 is an inductive proximity sensor built for automation and control systems. It detects metal targets at a rated switching distance of 15 mm without physical contact. The NPN normally open output suits PLC inputs and similar DC logic circuits. It mounts in a standard M30 × 1.5 threaded barrel for quick installation.
DC three-wire 10 to 30 V operation
The sensor runs on a 10 to 30 VDC supply through a three-wire connection. A plastic PA12-GF30 housing resists oils, coolants and mechanical shock in harsh environments. Non-flush mounting allows the sensing face to sit proud of surrounding metal for full range. The M12 × 1 male connector enables fast, tool-free cable attachment.
15 mm sensing range decides fit
The 15 mm rated switching distance is the single figure that determines whether this sensor reaches the target in your application. If the gap between sensor face and workpiece exceeds this value, detection will fail. Buyers who need a longer range must choose a different model. The fixed M30 thread and NPN output also constrain compatibility with existing mounting holes and controller inputs.
Highlights
- 15 mm switching distance detects metal targets reliably
- NPN normally-open output simplifies PLC wiring
- M12 connector enables quick installation
- PA12-GF30 housing resists chemicals and impact
- 10 to 30 VDC supply suits standard industrial power
Specifications
| Brand | TURCK |
|---|---|
| Model | NI15-S30-AN6X-H1141 46583 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I install the M30 × 1.5 threaded barrel and which step is often missed?
Screw the M30 × 1.5 barrel into the mounting hole and tighten to the recommended torque; the step often missed is confirming non-flush clearance so the 15 mm sensing face is not recessed behind metal.
What maintenance or replacement will the sensor need later?
The PA12-GF30 housing and M12 × 1 connector are sealed; no routine maintenance is required, but replace the unit if the NPN output fails or the connector pins become damaged.
What limit appears first during continuous operation?
The 10…30 VDC supply range and 15 mm rated switching distance set the boundaries; voltage drop below 10 V or target distance beyond 15 mm will stop reliable switching first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
