Turck
Turck NI15-M30-VP4X-H1141 1561700 inductive sensor M30 x 1.5 non-flush
Non-flush M30 × 1.5 inductive sensor with chrome-plated brass housing for metal detection
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 15 mm sensing range detects metal at distance
- M30 × 1.5 threaded barrel fits standard mounts
- Non-flush mounting allows side detection
- Chrome-plated brass housing resists corrosion
- Order 1561700 identifies exact replacement part
Threaded-barrel inductive sensor
The Turck NI15-M30-VP4X-H1141 is a non-flush inductive sensor built into an M30 × 1.5 chrome-plated brass barrel. It detects metal targets at a 15 mm sensing distance without physical contact. The rugged metal housing suits industrial environments where reliable presence detection is required. Order number 1561700 identifies this specific model.
Installers needing non-flush mounting
This sensor fits applications where the barrel cannot sit flush with the mounting surface, allowing the sensing face to protrude for an unobstructed field. It is not suited for flush-mount installations or for detecting non-metallic materials. Buyers who need a flush-mount design or a different thread size should look at other models.
15 mm sensing distance
The 15 millimetre sensing range is the key figure that determines whether this sensor reaches the target in your setup. If the gap between sensor face and metal object exceeds this distance, detection will not occur. Verify the required range before purchase.
Highlights
- 15 mm sensing range detects metal at distance
- M30 × 1.5 threaded barrel fits standard mounts
- Non-flush mounting allows side detection
- Chrome-plated brass housing resists corrosion
- Order 1561700 identifies exact replacement part
Specifications
| Brand | TURCK |
|---|---|
| Model | NI15-M30-VP4X-H1141 1561700 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How can I confirm the NI15-M30-VP4X-H1141 is detecting metal correctly after installation?
Power the sensor and bring a metal target within the 15 mm sensing range; the output should switch state, which can be verified with a multimeter or the connected PLC input.
What comes in the box with order number 1561700 and what must I purchase separately?
The box contains one inductive sensor with M30 × 1.5 chrome-plated brass housing; a compatible connector cable for the H1141 interface and mounting hardware are sold separately.
Which version of the NI15-M30-VP4X-H1141 should I choose for a non-flush mounting requirement?
This model is built specifically for non-flush mounting with a 15 mm range, M30 × 1.5 thread, and H1141 connector; select it when those exact specifications match your application.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
