Turck
Turck NI15-M30-AD4X-H1141 44177 inductive sensor M30 15mm 10-65VDC M12
M30 threaded inductive sensor detects metal at 15 mm, runs on 10–65 VDC and connects via M12 plug
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 15 mm sensing range detects metal at a distance
- 10 to 65 VDC supply fits wide voltage systems
- M12 × 1 connector enables quick wiring
- Chrome-plated brass housing resists corrosion
- Non-flush M30 × 1.5 mounting suits recessed installs
Industrial proximity sensor for metal detection
The Turck NI15-M30-AD4X-H1141 is an inductive sensor built for automation and machine-monitoring tasks. Its M30 × 1.5 threaded barrel fits standard mounting holes in conveyors, presses and robotic cells. The 15 mm rated switching distance suits presence checks on ferrous targets without physical contact. Chrome-plated brass housing resists coolant splash and mechanical wear in harsh production environments.
DC two-wire operation between 10 and 65 volts
The sensor runs on a wide DC supply range, simplifying integration with PLC input modules and relay logic. A normally-open output switches only when metal enters the sensing field, reducing false triggers at power-up. Two-wire topology means the load connects in series with the sensor, so voltage drop across the device must be accounted for in the control circuit design. No separate ground wire is required, but the available load current depends on the supply voltage used.
M12 connector and non-flush mounting
A M12 × 1 male connector provides a quick-disconnect interface compatible with standard cordsets, speeding replacement during planned maintenance. Non-flush mounting requires a metal-free zone around the sensing face to prevent premature switching, which influences bracket design and panel cut-out dimensions. The 110 g chrome-plated brass body withstands vibration and thermal cycling typical of automotive and packaging lines. Order number 44177 identifies the exact variant for spare-parts tracking.
Highlights
- 15 mm sensing range detects metal at a distance
- 10 to 65 VDC supply fits wide voltage systems
- M12 × 1 connector enables quick wiring
- Chrome-plated brass housing resists corrosion
- Non-flush M30 × 1.5 mounting suits recessed installs
Specifications
| Brand | TURCK |
|---|---|
| Model | NI15-M30-AD4X-H1141 44177 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I choose the 15 mm switching distance or a different range?
This sensor has a fixed 15 mm rated switching distance; choose it when your application needs that exact non-flush sensing range.
What does the 15 mm rating mean once the sensor is installed?
It will reliably detect a standard metal target up to 15 mm away from the sensing face under normal conditions.
What does the M12 × 1 connector cap in practice?
The M12 × 1 male connector carries the 10…65 VDC 2-wire NO signal and locks securely for industrial vibration resistance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
