Turck
Turck Ni15-G30-AN6X 4647700 inductive sensor NPN M30×1.5 10-30 VDC 15 mm 204 g
M30×1.5 inductive sensor detects metal at 15 mm with NPN output on 10–30 VDC
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 15 mm switching distance detects metal targets reliably
- NPN normally-open output simplifies PLC wiring
- 10–30 VDC supply range fits standard control voltages
- M30×1.5 chrome-plated brass barrel resists harsh environments
- 204 g lightweight metal housing eases panel mounting
Inductive sensor with NPN output
The Turck Ni15-G30-AN6X is a threaded-barrel inductive sensor designed for non-flush mounting in metal housings. It operates on 10 to 30 VDC with a 3-wire DC connection and provides a normally-open NPN switching signal. The 15 mm rated switching distance suits presence detection in industrial automation. A chrome-plated brass barrel and cable connection complete the assembly.
Suited for NPN-input controls.
This sensor matches controllers that require a sinking NPN output and can accommodate a non-flush M30 × 1.5 mounting profile. Buyers whose PLC or relay inputs expect a sourcing PNP signal should select a different output type. Applications demanding flush mounting or a connectorised electrical interface will also need an alternative model.
15 mm rated switching distance
The 15 mm switching distance defines the maximum reliable detection range for a standard steel target. This figure determines whether the sensor can bridge the required gap between its sensing face and the actuating object in the machine design. If the installation demands a longer or shorter sensing range, a different sensor specification is required.
Highlights
- 15 mm switching distance detects metal targets reliably
- NPN normally-open output simplifies PLC wiring
- 10–30 VDC supply range fits standard control voltages
- M30×1.5 chrome-plated brass barrel resists harsh environments
- 204 g lightweight metal housing eases panel mounting
Specifications
| Brand | TURCK |
|---|---|
| Model | Ni15-G30-AN6X 4647700 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What supply voltage range does the 10…30 VDC inductive sensor accept?
The sensor operates on 10 to 30 VDC, so any DC source within that window will power it correctly.
What clearance does the M30 × 1.5 threaded barrel need for non-flush mounting?
A non-flush M30 × 1.5 barrel requires a clear hole through the bracket plus enough space for the 15 mm sensing face to project past the mounting surface.
Which wires go where on the three-wire NPN cable?
Connect brown to positive, blue to negative, and black to the load; the load then returns to negative to complete the NPN sinking circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
