Turck
Turck BI8-M18K-AP6X-H1141 inductive sensor PNP M18×1 10…30 VDC M12×1 connector
M18 flush-mount inductive sensor with 8 mm range, PNP NO output, 10–30 VDC supply and M12 connector
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 8 mm sensing range for reliable detection
- PNP NO output simplifies control wiring
- 10–30 VDC supply suits industrial power
- M12×1 connector enables quick installation
- Chrome-plated brass housing resists harsh environments
Turck M18 inductive sensor for flush mounting
This Turck BI8-M18K-AP6X-H1141 sensor detects metal targets at an 8 mm rated switching distance. It operates on 10…30 VDC with a PNP normally open output. The chrome-plated brass barrel suits industrial environments. Order number 4615050 identifies this specific model.
M12 connector and threaded barrel simplify wiring
The M12 × 1 male connector plugs directly into compatible cordsets without soldering. The M18 × 1 thread allows flush mounting in a prepared hole using standard locknuts. A common issue is selecting an NPN input module when the sensor provides a PNP sourcing output.
8 mm switching distance decides fit
The rated switching distance of 8 mm determines whether the sensor reliably detects the target at the required gap. If the application demands a longer or shorter sensing range, this specific model will not meet the requirement. Buyers who need a different sensing distance should select another variant.
Highlights
- 8 mm sensing range for reliable detection
- PNP NO output simplifies control wiring
- 10–30 VDC supply suits industrial power
- M12×1 connector enables quick installation
- Chrome-plated brass housing resists harsh environments
Specifications
| Brand | TURCK |
|---|---|
| Model | BI8-M18K-AP6X-H1141 4615050 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I verify the sensor is operating correctly after wiring it to a 10…30 VDC supply?
Apply power and bring a metal target within the 8 mm rated switching distance; the PNP output should switch high at the connector, confirming the NO contact function.
What comes in the box and what must I source separately?
The box contains one BI8-M18K-AP6X-H1141 sensor with M12×1 male connector; you must supply a compatible M12×1 female cordset and a 10…30 VDC power source.
Which connector version should I choose for an M12×1 interface?
This model (order number 4615050) is built with an M12×1 male connector, so select it when your cable or junction box uses the matching M12×1 female fitting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
