Turck
Turck BI5-M18-RP6X-H1143 4614525 Inductive sensor PNP M18 electrician tool
Flush-mount M18 inductive sensor with 5 mm range, PNP NC output and M12 connector for 10–30 VDC systems
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- PNP output simplifies wiring for DC control systems
- 10–30 VDC supply range fits common industrial power rails
- 5 mm switching distance detects metal targets reliably
- M12 connector enables quick installation and replacement
- Chrome-plated brass housing resists corrosion in harsh environments
Turck M18 PNP inductive sensor
The Turck BI5-M18-RP6X-H1143 is a flush-mount inductive proximity sensor with an M18 × 1 threaded brass barrel. It delivers a 5 mm rated switching distance and provides a normally-closed PNP output through an M12 × 1 male connector. The chrome-plated housing weighs 48 g and operates on a 10–30 VDC supply.
Suited for NC PNP logic; not for NO or NPN needs
This sensor suits automation engineers who require a normally-closed PNP signal for safety or interlock circuits. It is not for applications that need a normally-open contact, an NPN output type, or a different switching distance than the specified 5 mm.
5 mm flush switching distance
The single specification that decides fit is the 5 mm rated switching distance with flush mounting. If the target cannot approach within that range or the mechanical design demands a non-flush sensor, this model will not detect reliably.
Highlights
- PNP output simplifies wiring for DC control systems
- 10–30 VDC supply range fits common industrial power rails
- 5 mm switching distance detects metal targets reliably
- M12 connector enables quick installation and replacement
- Chrome-plated brass housing resists corrosion in harsh environments
Specifications
| Brand | TURCK |
|---|---|
| Model | BI5-M18-RP6X-H1143 4614525 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the M18 × 1 threaded barrel fit the existing M18 mounting holes on my machine?
Yes, the sensor uses an M18 × 1 threaded barrel designed for flush mounting in standard M18 holes.
How can I verify the PNP output is switching correctly after wiring the M12 connector?
With 10…30 VDC applied, the NC contact opens when metal enters the 5 mm sensing range; measure the output voltage change at the M12 pins.
Does the box include the M12 mating cable or must I order it separately?
The sensor is sold as a single unit in a box; the M12 × 1 male connector is built in, so a compatible M12 cable must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
