Turck
Turck Bi2-S12-AP6X-H1141 46520 M12 inductive sensor PNP electrician tool
M12 inductive sensor with PNP output, 2 mm switching distance and 10–30 VDC supply in a flush-mount plastic housing
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 2 mm switching distance for precise detection
- 10–30 VDC supply fits common control voltages
- PNP normally-open output simplifies wiring
- M12 connector enables quick installation
- PA12-GF30 housing resists industrial environments
Turck M12 Inductive Sensor PNP
The Turck Bi2-S12-AP6X-H1141 is a flush-mount inductive proximity switch with a threaded M12 × 1 barrel. It operates on 10…30 VDC and provides a PNP normally-open output through an M12 male connector. The housing uses PA12-GF30 plastic and weighs 23 g. It suits automation tasks requiring non-contact metal detection at a 2 mm rated switching distance.
Compatibility Checklist
Verify that your control system accepts a PNP normally-open signal and supplies 10…30 VDC. Confirm the mounting hole matches an M12 × 1 thread for flush installation. Ensure the M12 × 1 male connector matches your cable or distribution box. The sensor is sold as a single unit in a box with order number 46520.
Build Integration
The three-wire DC design connects directly to PLC inputs or relay logic without extra signal conditioning. The plastic body resists corrosion and reduces weight in dense sensor arrays. The M12 connector allows quick replacement without rewiring the trunk line. Buyers needing NPN output, analog signals or longer switching distances should select a different model.
Highlights
- 2 mm switching distance for precise detection
- 10–30 VDC supply fits common control voltages
- PNP normally-open output simplifies wiring
- M12 connector enables quick installation
- PA12-GF30 housing resists industrial environments
Specifications
| Brand | TURCK |
|---|---|
| Model | Bi2-S12-AP6X-H1141 46520 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the sensor ship with the M12 connector and mounting hardware or must they be ordered separately?
The sensor has an integrated M12 × 1 male connector and a threaded M12 × 1 barrel for flush mounting; no separate connector or bracket is included in the single-unit box.
What distinguishes the Bi2-S12-AP6X-H1141 from other M12 inductive sensors in the range?
This model combines a 2 mm rated switching distance, PNP normally-open output, 10–30 VDC supply, PA12-GF30 housing and an M12 connector in one order number, 46520.
How does the 2 mm rated switching distance behave once the sensor is mounted flush in metal?
Mounting flush in metal maintains the 2 mm rated switching distance because the plastic PA12-GF30 front cap prevents metal-to-metal interference.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
