Turck
Turck BI10U-G30-ADZ30X2-B3131 M30×1.5 IP68 10mm 122g electrician tool
M30×1.5 inductive sensor detects all metals at 10 mm with IP68 protection and magnetic-field resistance
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm sensing range detects all metals at equal distance
- IP68-rated chrome-plated brass housing withstands harsh environments
- Magnetic-field immunity ensures reliable operation near welding equipment
- 1/2" male connector enables quick installation in M30×1.5 threaded ports
- 122 g lightweight sensor reduces mounting stress on machinery
Turck M30 inductive sensor
The Turck BI10U-G30-ADZ30X2-B3131 is a flush-mount inductive proximity sensor built for industrial automation. Its M30 × 1.5 threaded brass barrel carries a 1/2" male connector for direct wiring. The sensor suits electricians and maintenance engineers who need reliable metal detection in harsh environments.
10 mm sensing range with Factor 1
Rated switching distance is 10 mm and Factor 1 gives equal response on all metals without correction factors. The uprox®+ design resists magnetic-field interference from welding equipment or large motors. Operating voltage spans AC 20–250 V and DC 10–300 V for broad panel compatibility.
IP68 sealing and extended temperature range
Chrome-plated CuZn housing meets IP68 for continuous immersion and wash-down cycles. Extended temperature rating keeps the sensor stable in cold stores or hot process zones. High switching frequency supports fast cycle times on conveyors and packaging lines. Weight is 122 g.
Highlights
- 10 mm sensing range detects all metals at equal distance
- IP68-rated chrome-plated brass housing withstands harsh environments
- Magnetic-field immunity ensures reliable operation near welding equipment
- 1/2" male connector enables quick installation in M30×1.5 threaded ports
- 122 g lightweight sensor reduces mounting stress on machinery
Specifications
| Brand | TURCK |
|---|---|
| Model | BI10U-G30-ADZ30X2-B3131 4281613 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the M30×1.5 threaded barrel fit the existing mounting holes on my panel?
The sensor uses a standard M30 × 1.5 thread, so it matches any panel cut to that specification.
How can I verify the 10 mm switching distance is working after installation?
Bring a metal target to 10 mm; the NO contact should close and the connector LED will indicate the switch state.
Does the box include a mating cable for the 1/2" male connector or must I order one separately?
Only the sensor is supplied; a compatible 1/2" female connector cable must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
