Turck
Turck BI10-M30-AZ3X/S90 inductive sensor 10 mm 20-250 VAC 10-300 VDC 5 m cable 4316411
M30 threaded inductive sensor detects metal at 10 mm, runs on 20–250 VAC or 10–300 VDC, and includes a 5 m cable
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm sensing range detects metal targets reliably
- Wide 20-250 VAC and 10-300 VDC supply suits many installations
- 5 m cable allows flexible mounting without extra wiring
- Chrome-plated brass M30×1.5 housing resists harsh environments
- Normally open output simplifies control logic integration
M30 Inductive Sensor for Industrial Detection
The Turck BI10-M30-AZ3X/S90 is a flush-mount inductive proximity sensor built for factory automation and machine monitoring. It detects metal targets at a rated switching distance of 10 mm using a chrome-plated brass barrel. The unit suits engineers and maintenance teams who need reliable presence sensing on conveyors, presses or assembly fixtures.
Straightforward Cable Installation
The sensor terminates in a 5 m cable for direct wiring into control cabinets or junction boxes. A two-wire design works with both AC supplies from 20 to 250 VAC and DC supplies from 10 to 300 VDC, reducing the number of variants to stock. The M30 × 1.5 thread allows quick mounting in standard tapped holes, but flush installation requires a clear metal-free zone around the sensing face to avoid false triggers.
10 mm Switching Distance Defines Fit
The single figure that decides compatibility is the 10 mm rated switching distance; applications needing longer range or non-metallic target detection cannot use this model. The normally open output switches only when a metal object enters the sensing field, so logic that requires a normally closed signal will need a different part number.
Highlights
- 10 mm sensing range detects metal targets reliably
- Wide 20-250 VAC and 10-300 VDC supply suits many installations
- 5 m cable allows flexible mounting without extra wiring
- Chrome-plated brass M30×1.5 housing resists harsh environments
- Normally open output simplifies control logic integration
Specifications
| Brand | TURCK |
|---|---|
| Model | BI10-M30-AZ3X/S90 5M 4316411 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How can I verify the sensor is detecting metal at the 10 mm rated distance after installation?
Bring a standard steel target to the sensing face at 10 mm; the NO contact will close and the connected load will energise, confirming correct operation.
What comes in the box and what must I supply separately?
The box contains one inductive sensor with a 5 m cable attached; you must provide a compatible power source within 20…250 VAC or 10…300 VDC and a mounting arrangement for the M30 × 1.5 thread.
Which version should I choose for flush mounting in a metal housing with AC or DC supply?
This model is the flush-mount, chrome-plated brass M30 × 1.5 version with a NO contact and 5 m cable, designed for both 20…250 VAC and 10…300 VDC supplies.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
