Turck
Turck BC10-S30-VP4X 2506110 M30×1.5 10 mm 10-65 VDC PNP inductive sensor
M30×1.5 threaded inductive sensor detects metal at 10 mm with 10–65 VDC PNP complementary output and potentiometer fine adjustment
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- M30×1.5 threaded barrel simplifies mounting
- 10 mm flush sensing range detects targets reliably
- 10–65 VDC supply suits varied control voltages
- Complementary PNP output provides both NO and NC signals
- PA12-GF30 housing resists impact and chemicals
Industrial sensing
The Turck BC10-S30-VP4X is a flush-mount inductive sensor with a 10 mm switching distance. It suits automation engineers who need reliable metal detection on conveyors or machine frames. The PNP complementary output gives both normally-open and normally-closed signals from one device.
Installation checks
Verify that the mounting hole accepts an M30 × 1.5 thread and that the supply rail stays within 10…65 VDC. The four-wire cable needs a complementary input module; two-wire sourcing cards will not read both states. The PA12-GF30 housing resists oils and coolants but avoid direct welding splatter.
Upgrade path
Replaces older M30 sensors that only offer a single output function, cutting wiring time where both signals are required. The potentiometer allows fine distance tuning without shims, useful when the target position shifts between product runs. Not for applications needing non-flush sensing ranges beyond 10 mm.
Highlights
- M30×1.5 threaded barrel simplifies mounting
- 10 mm flush sensing range detects targets reliably
- 10–65 VDC supply suits varied control voltages
- Complementary PNP output provides both NO and NC signals
- PA12-GF30 housing resists impact and chemicals
Specifications
| Brand | TURCK |
|---|---|
| Model | BC10-S30-VP4X 2506110 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What is included in the box with the BC10-S30-VP4X sensor and what must be purchased separately?
The sensor is sold as a single unit in a box; mounting hardware and cable connectors are not included and must be sourced separately.
Which specification should I match when selecting the BC10-S30-VP4X — thread size, voltage range or sensing distance?
Choose the M30 × 1.5 thread for the mounting hole, the 10…65 VDC supply for your control voltage, and the 10 mm flush sensing distance for the detection gap required.
What does the 10 mm rated switching distance mean once the sensor is installed in a machine?
It detects a standard steel target reliably at up to 10 mm when mounted flush in metal, giving a predictable trigger point for position sensing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
