Turck
Turck BC10-M30K-AZ3X 2503031 capacitive sensor M30×1.5 10 mm 20…250 VAC
Detects objects up to 10 mm with a chrome-plated brass M30×1.5 threaded barrel, 20–250 VAC two-wire AC output, and cable connection
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm sensing range detects targets at distance
- M30 × 1.5 threaded barrel fits standard mounts
- Chrome-plated brass housing resists corrosion
- 20…250 VAC supply works with mains voltage
- Fine-tune sensitivity via built-in potentiometer
Turck M30 capacitive sensor for AC circuits
The Turck BC10-M30K-AZ3X is a flush-mount capacitive sensor with a 10 mm rated switching distance. It suits electricians and maintenance technicians who need non-contact detection of liquids, powders or solid materials in industrial environments. The AC two-wire output operates directly on 20…250 VAC supply without a separate DC power unit.
Two-wire AC limits and voltage range
The sensor switches a normally open contact in series with the load, so a small leakage current remains in the off state and the load must tolerate the full mains voltage drop. The 20…250 VAC window covers common control voltages but excludes low-voltage DC buses and supplies above 250 VAC. Cable connection is fixed, so cable length cannot be changed on site.
Chrome-plated brass barrel and fine adjustment
The M30 × 1.5 threaded barrel is machined from CuZn brass with a chrome-plated surface that resists coolant, oil and cleaning agents. A built-in potentiometer allows fine adjustment of the switching point after mounting. At 214 g the unit adds minimal mass to brackets or machine frames, and the metal housing provides mechanical protection in harsh areas.
Highlights
- 10 mm sensing range detects targets at distance
- M30 × 1.5 threaded barrel fits standard mounts
- Chrome-plated brass housing resists corrosion
- 20…250 VAC supply works with mains voltage
- Fine-tune sensitivity via built-in potentiometer
Specifications
| Brand | TURCK |
|---|---|
| Model | BC10-M30K-AZ3X 2503031 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I pick the right sensing distance for my application?
The sensor offers a 10 mm rated switching distance with a fine‑adjustment potentiometer so you can tune the trigger point precisely for the material you are detecting.
What does the 10 mm switching distance mean once the sensor is installed?
It detects a standard target at up to 10 mm when mounted flush in an M30 × 1.5 threaded barrel, and the potentiometer lets you reduce that range if needed.
What does the 20…250 VAC supply range cap in practice?
The AC 2‑wire output switches directly on the mains‑level supply, so the sensor can drive loads up to 250 VAC without a separate amplifier.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
