TurboTorch
TurboTorch 0386-0384 Torch Kit X-5MC Acetylene CGA-200 A-5
Acetylene torch kit for brazing and soldering up to 1 1/2 inch soft solder with quick-connect handle and swirl flame tip
- Swirl flame delivers even heat for consistent brazing
- CGA-200 regulator connects directly to MC acetylene cylinders
- Quick-connect fittings speed up setup and changeover
- Includes AH-12 hose, tank key and G4 handle for immediate use
- Handles soft solder 3/4 to 1-1/2 in and silver braze 1/4 to 3/4 in
TurboTorch X-5MC Acetylene Kit
The TurboTorch X-5MC kit provides a complete acetylene brazing and soldering solution. It includes a G4 torch handle, AH-12 hose, tank key, and A-5 swirl tip with quick-connect fittings. The kit connects to MC-size fuel cylinders via a CGA-200 regulator and uses an external lighter for ignition.
For Plumbers And HVAC Techs
This kit suits professionals joining copper pipe from three-quarter inch up to one and a half inches for soft solder, or up to three-quarter inch for silver brazing. It is not for jobs requiring larger diameter pipe capacity or alternative fuel types such as propane or MAPP gas.
Quick-Connect Assembly
The quick-connect fittings allow fast assembly of the handle, hose, regulator, and tip without tools. The tank key opens the MC cylinder valve. Common issues include leaks at loose connections, so check every joint before lighting the torch.
Highlights
- Swirl flame delivers even heat for consistent brazing
- CGA-200 regulator connects directly to MC acetylene cylinders
- Quick-connect fittings speed up setup and changeover
- Includes AH-12 hose, tank key and G4 handle for immediate use
- Handles soft solder 3/4 to 1-1/2 in and silver braze 1/4 to 3/4 in
Specifications
| Brand | TURBOTORCH |
|---|
Questions about this item
What size acetylene cylinder does the CGA-200 regulator on this X-5MC kit fit?
The included regulator carries a CGA-200 connection, which is the standard thread for MC-size acetylene cylinders.
Can I keep using my existing TurboTorch quick-connect hoses and tips with the G4 handle in this kit?
Yes, the G4 handle uses the same quick-connect interface, so your current AH-12 hose and A-5 tip will attach directly.
How do I verify the swirl flame is set correctly after lighting the torch with an external lighter?
Open the acetylene valve until the flame leaves the tip, then back off until a stable, quiet swirl cone appears with no soot.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
