We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TSUJ

TSUJ NFB10512HF -7F03 12V 0.39A 3-pin 70mm 105x105x32mm industrial cooling fan

SKU CH-NVQF-E6CCT

A 12 V DC square fan with 3-pin connector and 70 mm blade cools servers in a 105 × 105 × 32 mm frame

  • FeaturesCooling NFB10512HF -7F03 DC 12V 0.39A 3-wire 3-pin connector
  • Runs on standard 12 V DC power for easy integration
  • 3-pin connector enables speed monitoring and control
  • Compact 105 mm square frame fits tight server chassis
  • 70 mm blade diameter balances airflow with low noise

TSUJ 12 V industrial cooling fan

The TSUJ NFB10512HF -7F03 is a 12 V DC axial fan built for server and industrial enclosures. It draws 0.39 A through a three-pin connector and fits a 105 mm square frame that is 32 mm deep. The 70 mm impeller is designed for steady airflow in rack-mounted equipment.

Three-pin connector limits speed control

The three-wire interface supplies power and a tachometer signal but does not accept PWM duty-cycle commands. Voltage regulation is the only way to vary fan speed, so systems that rely on four-pin PWM headers cannot modulate this unit automatically. Builders who need closed-loop speed control should verify their controller supports voltage-based regulation.

Highlights

  • Runs on standard 12 V DC power for easy integration
  • 3-pin connector enables speed monitoring and control
  • Compact 105 mm square frame fits tight server chassis
  • 70 mm blade diameter balances airflow with low noise

Specifications

BrandTSUJ
Part NumberKepler-C72J-OYS-0138
FeaturesCooling NFB10512HF -7F03 DC 12V 0.39A 3-wire 3-pin connector 70mm 105x105x32mm Server Square Cooling fan

Questions about this item

Which connector matches my board — the 3-pin or a 4-pin PWM header?

The fan uses a 3-pin connector that fits standard 3-pin fan headers and also seats in 4-pin PWM headers; speed is controlled by voltage on either header.

What does the 0.39 A rating mean for my 12 V fan header?

At 12 V the fan draws 0.39 A, so the header must supply that current continuously for stable operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.