We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 92mm frame cooling fan with centre hub and three-wire cable

TSUJ

TSUJ Kepler-C72J-OYS-0140 92mm 24V 0.75A 18W 4800RPM 110CFM 55DB 3-Wire Fan

SKU CH-F3SR-Z974X

92 mm 24 V cooling fan delivers 110 CFM at 4800 RPM with 55 dB noise level

  • Featuresfor FFB0924EHE-F00 24V 0.75A 18W 4800RPM 110CFM 55DB 92X92X3
  • High airflow cools efficiently with 110 CFM rating
  • 4800 RPM speed delivers strong cooling performance
  • 3-wire connection supports speed monitoring and control
  • Compact 92 x 92 x 38 mm size fits tight spaces

TSUJ 92 mm 24 V Cooling Fan

The TSUJ Kepler-C72J-OYS-0140 is a 92 mm square fan designed for 24 V DC systems. It suits builders replacing the FFB0924EHE-F00 in industrial or networking equipment that requires a 3-wire connection. Buyers needing a different voltage, a larger frame or a 4-wire PWM control cannot use this model.

Thermals, Noise and Power Draw

At 4800 RPM the fan moves 110 CFM while drawing 0.75 A and 18 W. Acoustic output reaches 55 dB under normal operation. The 38 mm thickness fits standard 92 mm mounting patterns. No lower-speed or quieter operating points are specified in the data.

Highlights

  • High airflow cools efficiently with 110 CFM rating
  • 4800 RPM speed delivers strong cooling performance
  • 3-wire connection supports speed monitoring and control
  • Compact 92 x 92 x 38 mm size fits tight spaces

Specifications

BrandTSUJ
Part NumberKepler-C72J-OYS-0140
Featuresfor FFB0924EHE-F00 24V 0.75A 18W 4800RPM 110CFM 55DB 92X92X38MM 3-Wire Cooling Fan

Questions about this item

How do I mount the 92 mm by 92 mm by 38 mm fan and connect its 3-wire lead correctly?

Align the four corner holes of the 92x92x38 mm frame with the chassis mounts, secure with screws, then plug the 3-wire connector into a 24 V header matching the 0.75 A draw; the third wire carries the tach signal so the board can monitor the 4800 RPM speed.

What ongoing care does the 24 V 0.75 A 18 W unit need to keep delivering 110 CFM at 55 dB?

Periodically blow dust from the blades and housing with compressed air; if bearing noise rises above the rated 55 dB or airflow drops below 110 CFM, replace the fan as the sealed bearing is not serviceable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.