We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black frame cooling fan with seven blades and three-pin connector

TSUJ

TSUJ 2806KL-04W-B39 C01 DC12V 0.17A 7015 70x70x15mm 3Pin Cooling Fan

SKU CH-S26Z-HRW1G

12 V DC cooling fan with 70×70×15 mm frame and three-pin connector for projector use

  • Features1pcs 2806KL-04W-B39 C01 DC12V 0.17A 7015 7CM 70x70x15mm 3Pin
  • DC 12 V operation powers projector cooling reliably
  • 17 A draw keeps energy use low
  • 70 × 70 × 15 mm frame fits tight 7 cm bays
  • 3-pin connector enables speed monitoring and control

Compact 70 mm DC fan for projector cooling

The TSUJ 2806KL-04W-B39 C01 is a 70 mm square frame fan designed to fit projector housings and similar tight enclosures. It runs on 12 V DC and draws 0.17 A through a standard three-pin connector. The 15 mm thickness keeps the profile low for space-constrained builds.

Low current draw and simple three-pin power

At 0.17 A the fan adds minimal load to a 12 V rail and does not require a dedicated high-current header. The three-pin interface supplies power and tachometer feedback without PWM complexity. Operation stays quiet in typical projector duty cycles. No extra wiring or adapter is needed.

Highlights

  • DC 12 V operation powers projector cooling reliably
  • 17 A draw keeps energy use low
  • 70 × 70 × 15 mm frame fits tight 7 cm bays
  • 3-pin connector enables speed monitoring and control

Specifications

BrandTSUJ
Part NumberKepler-C72J-OYS-0032
Features1pcs 2806KL-04W-B39 C01 DC12V 0.17A 7015 7CM 70x70x15mm 3Pin Cooling Fan For Projector fan

Questions about this item

How do I install the TSUJ 2806KL-04W-B39 fan and what step is often missed?

Align the 70 mm square frame with the projector's mounting holes, connect the 3-pin plug to the 12 V header, and secure all four corners; the step often missed is checking that the 0.17 A draw matches the board's fan-header limit before powering on.

What maintenance will the TSUJ 7015 fan need later?

Expect to clean dust from the 70x70x15 mm blades every few months; if bearing noise appears or airflow drops, replace the entire 12 V unit as the bearings are not serviceable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.