We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TSUJ

TSUJ 2 in 1 accessory Kepler-C72J-OYS-0345 DC12V 0.34A 3110KL-04W-B60 8025 8cm 2-Wire

SKU CH-AXZP-QN4YY

An 8 cm two-wire chassis cooling fan running at 12 V and 0.34 A for high airflow

  • FeaturesDC12V 0.34A 3110KL-04W-B60 8025 8cm 2-Wire Large air Volume
  • 12 V power supply ensures stable operation
  • 34 A current draw keeps energy use low
  • 8 cm frame fits standard chassis slots
  • 2-wire design simplifies installation

8 cm 2-wire chassis cooling fan

This 8 cm chassis cooling fan connects via a two-wire DC12V interface and is rated at 0.34A. It is intended for system builders and technicians who need a replacement or additional airflow component for compatible enclosures. The unit carries part number Kepler-C72J-OYS-0345 and model reference 3110KL-04W-B60 for identification. Buyers who require a PWM-controlled or three-wire fan cannot use this model.

Thermals noise and power draw

Operating at 12V and 0.34A the fan draws approximately 4W of power while delivering a large air volume for chassis cooling. The two-wire design runs at a fixed speed so acoustic output remains constant under normal operation. No thermal sensor or speed curve is integrated so the device does not adjust RPM based on temperature. Installers should verify that the chassis can accommodate an 8025 form-factor unit before purchase.

Highlights

  • 12 V power supply ensures stable operation
  • 34 A current draw keeps energy use low
  • 8 cm frame fits standard chassis slots
  • 2-wire design simplifies installation

Specifications

BrandTSUJ
Part NumberKepler-C72J-OYS-0345
FeaturesDC12V 0.34A 3110KL-04W-B60 8025 8cm 2-Wire Large air Volume Chassis Cooling Fan

Questions about this item

How do I install the Kepler-C72J-OYS-0345 8025 chassis cooling fan and which step is often missed?

Align the four mounting holes with the chassis, secure the fan using screws, then connect the 2-wire lead to a 12 V DC header; the step most often missed is verifying the 0.34 A current draw matches the header rating.

What maintenance or replacement will the 3110KL-04W-B60 8cm fan need over time?

Periodically clean dust from the blades and frame to maintain the large air volume; if bearing noise appears or airflow drops, replace the entire 8025 unit as the 2-wire motor is not serviceable.

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.