We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue cast iron pillow block bearing with double sealed radial ball insert and set screw locking

Tritan

Tritan UCP208-40MM Pillow Block Bearing collectible

SKU CH-C5J2-Q2HSB

Cast-iron pillow-block bearing with 40 mm bore, double-sealed radial ball insert, 49.2 mm center height and 137 mm bolt centres

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlue
  • Cast-iron housing withstands heavy loads
  • Double-sealed closure keeps contaminants out
  • Fixed 40 mm bore fits standard shafts
  • Grease-lubricated for -40 °C to 120 °C range
  • Two bolt-through holes on 137 mm centres

Pillow Block Bearing 40 mm Bore

The Tritan UCP208-40MM is a cast-iron pillow block bearing designed for shaft support in power-transmission equipment. It uses a radial ball insert made from alloy steel and a set-screw locking mechanism to secure a 40 mm cylindrical bore. The unit suits maintenance teams and machinery builders who need a ready-to-mount housed bearing.

Double-Sealed Grease Fill -40 to 120 °C

The bearing arrives lubricated with grease and protected by double seals, rated for continuous operation between -40 °C and 120 °C. This fill handles typical industrial environments without relubrication intervals in the short term. Extreme contamination, sustained high-speed running or temperatures outside the stated range will exceed the seals and grease capacity.

Cast Iron Housing Two-Bolt Mounting

The blue-painted cast iron housing provides rigidity for fixed-expansion shafts and mounts through two bolt holes on 137 mm centres. The 49.2 mm centre height and 54 mm base width align with common UCP footprint standards. Builders must verify shaft tolerance and frame flatness themselves; no alignment shims or alternative hole patterns are supplied.

Highlights

  • Cast-iron housing withstands heavy loads
  • Double-sealed closure keeps contaminants out
  • Fixed 40 mm bore fits standard shafts
  • Grease-lubricated for -40 °C to 120 °C range
  • Two bolt-through holes on 137 mm centres

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlue

Questions about this item

Will the 40 mm bore on this UCP208 pillow block match the 40 mm shaft already on my machine?

Yes, the bore diameter is 40 mm and the bore type is cylindrical, so it fits a standard 40 mm shaft directly.

How can I confirm the bearing is running correctly once bolted down?

Check that the base height measures 18 mm, the center height is 49.2 mm and the housing sits flush on the mounting surface with the two bolt-through holes aligned to the 137 mm centre-to-centre pattern.

What comes in the box and what must I source separately?

The box contains the complete pillow block bearing with cast-iron housing, alloy-steel radial ball insert, double seals and factory grease fill; you must supply two mounting bolts and any shaft locking hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.