We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron pillow block bearing, blue finish, set screw locking, 3/4 inch bore

Tritan

Tritan UCP204-12 Pillow Block Bearing 3/4 in Bore Cast Iron Set Screws collectible

SKU CH-3WD0-W2W3G

Cast-iron pillow-block bearing with a 3/4 in cylindrical bore, double-sealed radial ball insert and set-screw locking for bolt-through mounting

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlue
  • 3/4 in bore fits standard shafts
  • cast iron housing resists heavy loads
  • double sealed closure blocks contaminants
  • grease lubrication handles -40 to 250 °F
  • bolt-through mount simplifies installation

Tritan UCP204-12 pillow block bearing

The Tritan UCP204-12 is a new pillow block bearing with a 3/4 in cylindrical bore and set-screw locking. Its cast-iron housing and alloy-steel radial ball insert are double sealed and grease lubricated for operation between -40 Degrees F and 250 Degrees F.

Bolt-through mounting with fixed expansion

The base measures .551 in high by 1.496 in wide with mount-hole centres at 3 47/64 in both length and width. Fixed expansion and bolt-through mounting suit static shaft locations where thermal growth is minimal and alignment stays constant.

Suits stationary shafts needing cast-iron rigidity

Buyers who need a fixed, double-sealed bearing for moderate temperatures will find this unit matches the spec. Those requiring floating expansion, higher temperature ratings or stainless-steel housings should look elsewhere.

Highlights

  • 3/4 in bore fits standard shafts
  • cast iron housing resists heavy loads
  • double sealed closure blocks contaminants
  • grease lubrication handles -40 to 250 °F
  • bolt-through mount simplifies installation

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlue

Questions about this item

How often will the grease lubricant need to be replenished in the UCP204-12 bearing?

The bearing is pre-lubricated with grease and double sealed for protection. Relubrication intervals depend on operating speed, load, and the 250 Degrees F maximum temperature limit.

What is the first limiting factor when running the UCP204-12 continuously under load?

The 250 Degrees F maximum operating temperature is the primary thermal limit. Exceeding this degrades the grease lubricant and double seals, reducing bearing life.

How much heat and noise does the cast iron housing produce during all-day operation?

The cast iron housing conducts heat away from the alloy steel insert. Normal operation stays within the -40 to 250 Degrees F range. Noise is typical for a radial ball bearing with set screw mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.