Tritan
Tritan SAFL205-16G 2-Hole Rhombus Flange Bearing Collectible
Two-hole rhombus flange bearing with alloy-steel radial insert, double-sealed and pre-lubricated for temperatures from −40 °F to 250 °F
- TypeBearings, V-belts & Power Transmission Equipment
- ColorBlue
- Rhombus housing provides secure two-bolt mounting
- Alloy steel radial ball bearing handles heavy radial loads
- Double sealed closure keeps lubricant in and contaminants out
- Operates from -40 to 250 degrees F for wide temperature range
- Factory lubricated with NLGI #2 equivalent grease for immediate use
Industrial Radial Ball Bearing Insert
The Tritan SAFL205-16G is a 2-bolt rhombus flange bearing built for radial-load power-transmission duties. It suits maintenance engineers and OEM assemblers who need a ready-to-mount unit with a 1-inch cylindrical bore and alloy-steel rolling elements.
Straightforward Two-Bolt Mounting
The cast-iron housing bolts down with two fasteners, so alignment is simple on flat surfaces. Double seals keep the NLGI #2 equivalent grease in and contaminants out, reducing the most common cause of early failure in dusty or wet environments.
Verify Shaft and Temperature Limits
Confirm the shaft measures exactly 1 inch for the cylindrical bore and that operating temperatures stay between -40 and 250 degrees F. The fixed expansion type does not accommodate axial float, so the mounting structure must hold the shaft axially.
Highlights
- Rhombus housing provides secure two-bolt mounting
- Alloy steel radial ball bearing handles heavy radial loads
- Double sealed closure keeps lubricant in and contaminants out
- Operates from -40 to 250 degrees F for wide temperature range
- Factory lubricated with NLGI #2 equivalent grease for immediate use
Specifications
| Brand | TRITAN |
|---|---|
| Type | Bearings, V-belts & Power Transmission Equipment |
| Color | Blue |
Questions about this item
How can I verify the bearing is running correctly after mounting it on the shaft?
Check that the shaft turns smoothly without binding, listen for unusual noise, and confirm the housing temperature stays well below the 250 degrees F maximum during operation.
What components come with the unit and is any additional hardware required?
The SA205-16G insert is included inside the cast-iron rhombus housing; you must supply the two mounting bolts that match the 2-hole flange pattern.
Which bore size should I select for a 1-inch shaft?
Choose the SAFL205-16G variant because its bore diameter is 1 inch and the bore type is cylindrical, matching a standard 1-inch shaft.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tour Edge Golf Mfg. Inc. pdprsu0138 golf accessory
- Toys and Games



