We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel sprocket with 15 teeth black oxide finish hub and keyway

Tritan

Tritan 60BS15H 15-Tooth Sprocket 1 7/16 in Bore Keyway Steel collectible

SKU CH-H2A2-XKE1Y

Finished-bore steel sprocket with 15 teeth, 1 7/16 in bore, keyway and set screws for 60 chain

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Ready for 60 chain with 15-tooth precision
  • 1 7/16 in bore fits existing shafts directly
  • 3/16 in keyway depth prevents rotational slip
  • Black oxide finish resists corrosion in service
  • Two set screws lock sprocket securely in place

Tritan 60BS15H 15-Tooth Sprocket

The Tritan 60BS15H is a finished-bore sprocket designed for single-strand 60 chain. It features 15 teeth with a pitch diameter of 3.608 in and an outside diameter of 3.98 in. The steel body has a black oxide finish and a hub diameter of 2 7/8 in.

Ideal for maintenance

This sprocket suits technicians replacing a worn 15-tooth drive on existing 60 chain drives where a 1 7/16 in bore with a standard keyway is required. It is not for buyers needing a different tooth count, a different chain pitch, a taper-lock hub or a larger bore diameter.

Verify chain and shaft compatibility before ordering

Confirm the drive uses ANSI 60 single-strand chain and that the driven shaft measures exactly 1 7/16 in with a 3/8 in wide by 3/16 in deep keyway seat. Check that the 1 1/4 in length through bore and 0.791 in hub projection clear adjacent components. Two set screws are included for axial locking.

Highlights

  • Ready for 60 chain with 15-tooth precision
  • 1 7/16 in bore fits existing shafts directly
  • 3/16 in keyway depth prevents rotational slip
  • Black oxide finish resists corrosion in service
  • Two set screws lock sprocket securely in place

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

Does the 1 7/16 in bore with 3/8 in keyway width match my existing shaft?

The sprocket has a fixed bore of 1 7/16 in with a 3/8 in wide keyway and 3/16 in depth, plus two set screws for locking onto a matching shaft.

Will this 15-tooth steel sprocket mesh with my current 60 chain?

Yes, it is cut for 60 chain pitch at 3/4 in and has 15 teeth with a 3.608 in pitch diameter for correct engagement.

How can I confirm the sprocket is seated correctly after installation?

Verify the hub projection measures 0.791 in, the outside diameter is 3.98 in, and the chain articulates smoothly over all 15 teeth without binding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.