We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black oxide steel sprocket with 11 teeth, 1 1/4 inch bore, keyway and two set screws

Tritan

Tritan 60BS11H 11-tooth sprocket 1 1/4 in bore collectible

SKU CH-MNCG-Q3QDH

Steel 11-tooth sprocket for #60 chain with 1 1/4 in fixed bore, keyway, and set screws

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Ready for 60 chain drives with 11-tooth precision
  • 1 1/4 in fixed bore fits shafts directly
  • Black oxide finish resists corrosion in use
  • Includes two set screws and 1/4 in keyway
  • 663 in pitch diameter ensures smooth engagement

Finished-Bore Sprocket for 60 Chain

This Tritan sprocket is a finished-bore power-transmission component with an 11-tooth profile cut for single-strand 60 chain. It arrives new with a 1 1/4 in bore, keyway and two set screws already installed, so maintenance teams can mount it on a matching shaft without additional machining.

11-Tooth Capacity and Chain Engagement

The 11-tooth design yields a 2.663 in pitch diameter and a 3 in outside diameter, suitable for light-to-moderate load drives where space is limited. With only 11 teeth in mesh, the sprocket reaches its practical torque limit sooner than larger sizes, making it unsuitable for high-shock or continuous heavy-duty applications.

Steel Construction with Black-Oxide Finish

The carbon-steel body carries a black-oxide coating that resists surface corrosion in typical indoor environments. No bearings or lubrication fittings are integrated, so the hub runs directly on the shaft; expect normal metallic contact noise and plan for periodic chain lubrication to control wear and heat buildup.

Highlights

  • Ready for 60 chain drives with 11-tooth precision
  • 1 1/4 in fixed bore fits shafts directly
  • Black oxide finish resists corrosion in use
  • Includes two set screws and 1/4 in keyway
  • 663 in pitch diameter ensures smooth engagement

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

Will this 11-tooth sprocket with its 1 1/4 in bore and 1/4 in keyway fit the shaft on my older 60-chain drive?

The sprocket has a fixed 1 1/4 in bore, a 1/4 in wide keyway cut 1/8 in deep, and two set screws, so it will fit a shaft of that exact diameter and key size.

How can I confirm the 60BS11H is seated correctly once I tighten the two set screws?

Check that the hub face sits flush against the shaft shoulder, rotate by hand to feel for binding, and verify the chain engages all 11 teeth smoothly without jumping.

Does the box include the 1/4 in key and any extra set screws, or do I need to source them separately?

The sprocket comes with two set screws installed; a 1/4 in x 1/8 in key is not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.