We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black oxide steel sprocket with 10 teeth, 1 inch bore, keyway and set screws

Tritan

Tritan 60BS10H Sprocket 10T 60 Chain 1in Bore Keyway SS collectible

SKU CH-ZKK9-PZ98B

A 10-tooth steel sprocket for 60 chain with a 1-inch finished bore, keyway and set screws

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • 10-tooth design matches #60 chain for precise power transfer
  • 1-inch finished bore with 1/4-inch keyway locks onto shaft without slippage
  • Black-oxide steel finish resists corrosion in demanding environments
  • Two set screws included secure sprocket firmly in place
  • 76-inch outside diameter fits compact drive layouts

Sprocket 10T 60 Chain 1in Bore Keyway

Tritan supplies a finished-bore sprocket with a 1 inch bore, keyway and two set screws. The steel body carries a black oxide finish and fits single-strand 60 chain. Ten teeth give a 2.427 inch pitch diameter and a 2.76 inch outside diameter.

Suited for repair and light power-transmission jobs

Maintenance technicians replacing a worn 60-chain sprocket on conveyors or agricultural equipment will find the fixed bore and keyway ready to install. Builders needing a different tooth count, a taper-lock hub or a larger bore must look elsewhere.

Keyway width 1/4 inch depth 1/8 inch

The keyway measures 1/4 inch wide by 1/8 inch deep, matching standard 1 inch shafting. Hub projection is 0.791 inch and length through bore is 1 1/4 inch, so verify shaft length and clearance before ordering.

Highlights

  • 10-tooth design matches #60 chain for precise power transfer
  • 1-inch finished bore with 1/4-inch keyway locks onto shaft without slippage
  • Black-oxide steel finish resists corrosion in demanding environments
  • Two set screws included secure sprocket firmly in place
  • 76-inch outside diameter fits compact drive layouts

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

What does the 10-tooth count mean for speed and torque on a size-60 chain?

Ten teeth on a 3/4-inch pitch chain gives a 2.427-inch pitch diameter, so the driven shaft turns faster but with less torque than a larger sprocket would provide.

How does the 1-inch bore with 1/4-inch keyway and two set screws lock onto a shaft?

The 1-inch finished bore accepts a matching shaft, the 1/8-inch deep by 1/4-inch wide keyway engages a standard key, and two set screws clamp the hub to prevent rotation.

Will the 2.76-inch outside diameter and 1-15/16-inch hub clear my guards and bearings?

The sprocket measures 2.76 inches across the teeth and the hub is 1-15/16 inches wide with a 0.791-inch projection, so check those dimensions against your guard spacing and bearing housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.