We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black-oxide steel sprocket with ten teeth, 7/8-inch bore, keyway and two set screws

Tritan

Tritan 50BS10H 10-tooth sprocket 50 chain 7/8 in bore collectible

SKU CH-QNFK-5Y67A

A 10-tooth steel sprocket for 50 chain with a 7/8 in bore, keyway, and set screws included

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • 10-tooth steel sprocket for #50 chain
  • 7/8 in finished bore with keyway and set screws
  • Black oxide finish resists corrosion
  • 3 in outside diameter fits compact drives
  • New old-stock collectible power-transmission part

Tritan 50BS10H 10-tooth sprocket for 50 chain

The Tritan 50BS10H is a finished-bore sprocket with a 7/8 inch bore, keyway and set screws included. It is designed for single-strand 50 chain drives in power-transmission applications. The steel body carries a black-oxide finish for corrosion resistance. Collectors of industrial hardware will also appreciate the original packaging and branding.

Thermals noise and power draw in normal use

As a passive steel component the sprocket generates no noise, vibration or heat of its own. It adds negligible rotating mass to the shaft and imposes no electrical load on the system. Operating temperature and sound levels are determined entirely by the driven machinery and lubrication regime.

The specification that decides fit

The critical dimension is the 7/8 inch fixed bore with a 3/16 inch keyway width and 3/32 inch depth, matched to a 10-tooth, 2.023 inch pitch diameter profile for 5/8 inch pitch chain. Buyers needing a different bore size, tooth count or chain pitch cannot use this part.

Highlights

  • 10-tooth steel sprocket for #50 chain
  • 7/8 in finished bore with keyway and set screws
  • Black oxide finish resists corrosion
  • 3 in outside diameter fits compact drives
  • New old-stock collectible power-transmission part

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

How do I install the Tritan 50BS10H sprocket and align the 3/16 in keyway correctly?

Slide the sprocket onto the 7/8 in shaft, engage the 3/16 in wide by 3/32 in deep keyway with the shaft key, then tighten both included set screws against the key and shaft flat to prevent rotation.

What maintenance will the black-oxide steel sprocket need over time?

Inspect the 10 teeth for hooking or uneven wear, check the 1 9/16 in hub and 1 in bore length for looseness, and re-tighten the two set screws if vibration develops; replace when tooth profile no longer matches 50 chain pitch.

At what point does the 2.023 in pitch diameter limit power transmission under sustained load?

The 2.023 in pitch diameter on a 10-tooth sprocket creates high tooth loading and chordal action, so chain tension fatigue and accelerated tooth wear become the limiting factors before hub or bore strength is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.