We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel chain sprocket with black oxide finish, 36 teeth, 3/4 inch bore with keyway

Tritan

Tritan 35BS36H 35 Chain Sprocket 36T 3/4in Bore Keyway SS collectible

SKU CH-H0A5-5EZTE

A 35 chain sprocket with 36 teeth, 3/4 inch bore, keyway and set screws for power transmission

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Precision fit for 35 chain with 36 hardened teeth
  • Secure keyway drive prevents slip under load
  • Black oxide finish resists corrosion in harsh use
  • Fixed 3/4 in bore aligns without adapters
  • Two set screws lock sprocket firmly in place

Finished bore sprocket for 35 chain

This TRITAN 35BS36H sprocket fits 35 chain pitch and has a fixed 3/4 in bore with keyway. It suits maintenance teams replacing worn drive components on conveyors or light machinery where a finished bore eliminates re-machining.

Two set screws and keyway included

The hub carries two set screws and a 3/16 in wide by 3/32 in deep keyway, so the sprocket locks to the shaft without extra hardware. Black oxide finish adds corrosion resistance during storage and service.

36 teeth on 4.303 in pitch diameter

With 36 teeth the pitch diameter is 4.303 in and the outside diameter is 4.51 in, fixing the speed ratio for any 35 chain drive. Buyers needing a different ratio or chain size must select another part.

Highlights

  • Precision fit for 35 chain with 36 hardened teeth
  • Secure keyway drive prevents slip under load
  • Black oxide finish resists corrosion in harsh use
  • Fixed 3/4 in bore aligns without adapters
  • Two set screws lock sprocket firmly in place

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

How often will the 3/16 in keyway and 3/32 in keyway depth need inspection or replacement?

Inspect the keyway and set screws during routine drivetrain maintenance; replace the sprocket if the keyway walls show elongation or the set-screw threads strip.

What limit appears first when the 36-tooth steel sprocket runs continuously under load?

Chain wear and tooth-profile elongation typically become the limiting factor before the 4.51 in outside diameter or 4.303 in pitch diameter geometry is affected.

How much heat and noise does the black-oxide finished sprocket generate during all-day operation?

The sprocket itself produces negligible heat and noise; virtually all thermal and acoustic output comes from the chain mesh and bearings in the drive assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.