We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red C20 to C21 power cord with thick 12 AWG cable and IEC connectors

Tripp Lite

Tripp Lite P035-006-ARD C20 to C21 20A 250V 12 AWG 6 ft red video accessory

SKU CH-ZBDG-HG7TJ MPN P035-006-ARD

A 6 ft red C20-to-C21 power cord rated 20 A, 250 V with 12 AWG conductors for high-power rack equipment

  • Heavy-duty 20 A 250 V rating powers demanding rack equipment
  • 12 AWG conductors handle high current without overheating
  • 6 ft length fits rack layouts while reducing cable clutter
  • Red jacket enables instant visual identification in dense enclosures
  • C20 to C21 connectors rated to 105 °C suit hot aisle environments

C20-to-C21 Heavy-Duty Power Cord

This 6 ft cable carries 20 A at 250 V using 12 AWG conductors and IEC 60320 C20 and C21 connectors. It is built for high-output IT equipment such as servers, network switches, PDUs and UPS units that require a heavier-gauge connection. The red jacket helps identify the cord quickly in a crowded rack enclosure.

Temperature and Current Limits

The connectors are rated for environments up to 221 °F (105 °C), which are common inside rack enclosures. The 12 AWG wire handles the 20 A load without excessive voltage drop over the 1.8 m length. No higher current or temperature rating is specified for this assembly.

Compatibility Checks Before Ordering

Verify that both the power source and the device present IEC 60320 C19/C22 inlets that accept C20 and C21 plugs respectively. Confirm the equipment draws no more than 20 A at 250 V AC. Ensure the 6 ft reach suits the rack layout without stretching or creating excess slack.

Highlights

  • Heavy-duty 20 A 250 V rating powers demanding rack equipment
  • 12 AWG conductors handle high current without overheating
  • 6 ft length fits rack layouts while reducing cable clutter
  • Red jacket enables instant visual identification in dense enclosures
  • C20 to C21 connectors rated to 105 °C suit hot aisle environments

Specifications

No published specifications for this item yet.

Questions about this item

Which length should I choose for my rack setup?

The cable is supplied in a single 6 ft (1.8 m) length designed to reach between a device and a PDU or UPS in a standard rack while minimising slack.

What does the 20 A / 250 V rating mean when the cord is powering a server?

It certifies the cord can continuously carry up to 20 amps at 250 volts AC, matching the draw of high-output switches, servers and blade systems without overheating.

How does the C20-to-C21 IEC 60320 connection limit what I can plug in?

The C20 plug fits a C19 inlet on a PDU or UPS, while the C21 connector accepts a C20 inlet on the device, so both ends must match those specific IEC 60320 interfaces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.